The WG04F11469 is the genuine OEM drain pump for GE and GE Profile front-load washers. The drain pump is responsible for evacuating water from the wash tub at the end of each cycle. When the pump motor fails, the impeller cracks, or debris jams the pump housing, the washer cannot drain — leaving standing water in the tub, triggering drain error codes, and leaving clothes soaking wet after the spin cycle. This OEM replacement restores full drain function and clears drain-related error codes.

✓ Model-Specific Repair Pages

Don't see your model? Contact us and we'll confirm compatibility.

The WG04F11469 drain pump uses an electric motor to drive an impeller that forces water through the drain hose and out of the machine. Pump failure typically presents as a complete inability to drain, though a partially blocked pump housing (from lint, coins, or small garment items) can also cause slow draining or intermittent drain errors. Before replacing the pump, always check the pump filter/coin trap for debris — a blocked filter is the most common cause of drain failure and requires no parts replacement. If the filter is clear and the pump motor does not run during the drain cycle, the pump assembly requires replacement.

✓ Common Symptoms Fixed

Washer not draining at end of cycle | Standing water remaining in tub | Drain error codes on display | Clothes soaking wet after spin cycle | Washer stopping mid-cycle during drain | Loud humming from pump area with no water movement | Slow draining or incomplete drain

✓ Key Features & Specifications

Genuine GE OEM drain pump assembly – guaranteed fit | Electric motor with impeller for reliable water evacuation | Includes pump housing, motor, and mounting hardware | Direct replacement – plug-in wiring harness connector | Replaces 0022150033660401 | Compatible with GE and GE Profile front-load washer models

✓ Buying Options

New / OEM: The WG04F11469 is the current genuine GE OEM drain pump assembly. Recommended for all repairs where reliable drain performance is required. This is a complete pump assembly — motor, housing, and impeller included.

✓ Replacement Part Numbers

WG04F11469 (current OEM) | 0022150033660401 (superseded)

✓ Installation Tips

Disconnect power and shut off the water supply before beginning this repair. Repair difficulty: 3/5. Estimated time: 45–90 minutes. The drain pump on GE front-load washers is typically accessed by removing the front lower access panel or tilting the machine back to access the bottom. Before removing the pump: run a drain/spin cycle to remove as much water as possible, then place towels and a shallow pan under the pump area — residual water will spill when hoses are disconnected. Disconnect the wiring harness, clamp and remove the inlet and outlet hoses, and remove the mounting screws. Reverse to install. Run a test drain cycle and check all hose connections for leaks before closing up the machine.

✓ Compatible Models

GFQ14ESSN0WW, GFW148SSM1WW, QFW150SSN0WW, and additional GE and GE Profile front-load washer models. Verify your full model number before ordering. Contact us to confirm compatibility.

✓ Frequently Asked Questions

How do I know if my drain pump is faulty? First check the pump filter/coin trap for debris — a blocked filter is the most common cause of drain failure. If the filter is clear, listen during the drain cycle: if the pump is silent (no humming), the motor has failed. If it hums but doesn't drain, the impeller may be jammed or broken. See our Washer Not Draining guide for a full diagnostic walkthrough.

Is this a difficult repair? Rated 3/5 difficulty. Accessing the pump requires removing panels and disconnecting hoses, and residual water management is important. Experienced DIYers can complete it in under 90 minutes. See our Washer Won't Drain guide for additional context.

Should I check the filter before replacing the pump? Yes — always check the pump filter/coin trap first. It is located behind the lower front access panel and can be cleaned without any parts. A blocked filter causes the same symptoms as a failed pump. Contact us if you need help locating the filter on your model.

Does this pump fit the GFW148SSM1WW? Yes — the WG04F11469 is confirmed compatible with the GFW148SSM1WW, GFQ14ESSN0WW, and QFW150SSN0WW. Always verify your full model number before ordering. Contact us to confirm compatibility with your specific model.