AUTO PART
Moog Alignment Shim K100143
Alignment Shim
Manufacturer Part NumberK100143
Part TypeAlignment Shim
Vehicle Focus (not verified fitment)2015 Nissan Sentra
BrandMoog
Verified vehicle applications are listed below. Match your exact vehicle configuration before ordering.
Confirm year, make, model, engine and drivetrain before ordering.
Confirm year, make, model, engine and drivetrain before ordering.
Verified Vehicle Fitment
Make: Buick, Cadillac, Chevrolet, Chrysler, Ford, Geo, Honda, Hyundai, Kia, Nissan, Oldsmobile, Pontiac, Saturn, Scion, Toyota, Volkswagen
Model: 56 verified models — see exact combinations below.
Years: 1978–2019, 2021–2023 — varies by model and configuration.
Check before ordering: Match the year, make, model, position, and every engine, transmission or other restriction in the same row. Listed years do not apply to every model.
View vehicle applications (100 configuration groups)
| Years | Make | Model | Position | Engine / transmission / notes |
|---|---|---|---|---|
| 1982–1996 | Buick | Century | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000–2005 | Buick | LeSabre | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2006–2011 | Buick | Lucerne | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1997–2005 | Buick | Park Avenue | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1989–1991 | Buick | Reatta | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007 | Buick | Rendezvous | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2006 | Buick | Rendezvous | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1978–1993, 1995–1999 | Buick | Riviera | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007 | Buick | Terraza | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005–2006 | Buick | Terraza | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000–2005 | Cadillac | DeVille | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2006–2011 | Cadillac | DTS | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1980–1992 | Cadillac | Eldorado | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1980–1992, 1998–2004 | Cadillac | Seville | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1982–1990 | Chevrolet | Celebrity | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1990–1996 | Chevrolet | Lumina APV | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1998–2002 | Chevrolet | Prizm | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2009 | Chevrolet | Uplander | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005–2006 | Chevrolet | Uplander | Rear | Drive Type: FWD; Sub Model: LT; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005–2006 | Chevrolet | Uplander | Rear | Sub Model: Base; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005–2006 | Chevrolet | Uplander | Rear | Sub Model: LS; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1997–2001, 2005 | Chevrolet | Venture | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Chevrolet | Venture | Rear | Drive Type: FWD; Sub Model: LS; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Chevrolet | Venture | Rear | Drive Type: FWD; Sub Model: LT; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2003 | Chevrolet | Venture | Rear | Drive Type: FWD; Sub Model: Warner Bros.; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002 | Chevrolet | Venture | Rear | Sub Model: Base; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Chevrolet | Venture | Rear | Sub Model: Plus; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2003 | Chevrolet | Venture | Rear | Sub Model: Value; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2011–2014 | Chrysler | 200 | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2010–2013 | Ford | Transit Connect | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1989–1997 | Geo | Prizm | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2008 | Honda | Fit | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2006–2011 | Hyundai | Accent | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2012–2017 | Hyundai | Veloster | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2010–2013 | Kia | Forte | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2010–2013 | Kia | Forte Koup | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2012–2013 | Kia | Forte5 | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2021–2023 | Kia | Seltos | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2010–2019 | Kia | Soul | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2015–2019 | Kia | Soul EV | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2014 | Nissan | Cube | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2013–2019 | Nissan | Sentra | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2011 | Nissan | Versa | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1995–1999, 2001–2003 | Oldsmobile | Aurora | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1982–1996 | Oldsmobile | Cutlass Ciera | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1987–1994 | Oldsmobile | Cutlass Cruiser | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1990–2001 | Oldsmobile | Silhouette | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Oldsmobile | Silhouette | Rear | Drive Type: FWD; Sub Model: GLS; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Oldsmobile | Silhouette | Rear | Drive Type: FWD; Sub Model: Premiere; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004 | Oldsmobile | Silhouette | Rear | Sub Model: GL; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1979–1992 | Oldsmobile | Toronado | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1982–1991 | Pontiac | 6000 | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2001–2005 | Pontiac | Aztek | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000–2005 | Pontiac | Bonneville | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1999–2001, 2007 | Pontiac | Montana | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005 | Pontiac | Montana | Rear | Drive Type: FWD; Sub Model: SV6; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2002–2004, 2006 | Pontiac | Montana | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1990–1999 | Pontiac | Trans Sport | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2008 | Pontiac | Vibe | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2006 | Pontiac | Vibe | Rear | Drive Type: FWD; Sub Model: Base; M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2006 | Pontiac | Vibe | Rear | Sub Model: GT; M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2010 | Pontiac | Vibe | Rear | Sub Model: Base; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2010 | Pontiac | Vibe | Rear | Sub Model: GT; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007 | Saturn | Relay | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2006 | Saturn | Relay | Rear | Drive Type: FWD; Sub Model: 3; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2005 | Saturn | Relay | Rear | Drive Type: FWD; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2006 | Saturn | Relay | Rear | Sub Model: 2; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2012–2015 | Scion | iQ | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2011–2016 | Scion | tC | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2004–2006 | Scion | xA | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2004–2006, 2008–2015 | Scion | xB | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2008–2014 | Scion | xD | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2018 | Toyota | Corolla | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Body Type: Sedan; Sub Model: SE; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Body Type: Sedan; Sub Model: XSE; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Sub Model: CE; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Sub Model: L; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Sub Model: LE Eco; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Sub Model: LE; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2019 | Toyota | Corolla | Rear | Sub Model: XLE; Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2008 | Toyota | Corolla | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000–2005 | Toyota | Echo | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2008 | Toyota | Matrix | Rear | M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2006 | Toyota | Matrix | Rear | Drive Type: FWD; Sub Model: Base; M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2006 | Toyota | Matrix | Rear | Drive Type: FWD; Sub Model: XR; M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2006 | Toyota | Matrix | Rear | Sub Model: XRS; M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2013 | Toyota | Matrix | Rear | Drive Type: FWD; Sub Model: S; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2010 | Toyota | Matrix | Rear | Drive Type: FWD; Sub Model: XR; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2013 | Toyota | Matrix | Rear | Sub Model: Base; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2009–2013 | Toyota | Matrix | Rear | Sub Model: XRS; without Independent Rear Suspension, M10 x 1.25 x 30 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2001–2015 | Toyota | Prius | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2012–2015 | Toyota | Prius Plug-In | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2007–2011 | Toyota | Yaris | Rear | Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 1998–1999 | Volkswagen | Passat | Rear | M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000 | Volkswagen | Passat | Rear | Drive Type: FWD; Sub Model: GLX; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2004–2005 | Volkswagen | Passat | Rear | Sub Model: GL TDI; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2003–2005 | Volkswagen | Passat | Rear | Sub Model: GL; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2004–2005 | Volkswagen | Passat | Rear | Sub Model: GLS TDI; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2000–2005 | Volkswagen | Passat | Rear | Sub Model: GLS; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
| 2001–2005 | Volkswagen | Passat | Rear | Sub Model: GLX; M10 x 1.5 x 40 (mm) Hub Bolts Should Be Used When Installing Rear Wheel Shim, Full Contact Dual Angle Shim, Use with Caliper Shim Spacers If Necessary, Yellow Shim, Internal Cut To Fit Tabs, Check Caliper To Rotor Clearance After Installation |
Source: supplier-verified applications for Moog K100143. A vehicle not listed is not confirmed compatible.
Shop more parts for your vehicle
Browse these vehicle parts pages, then check the restrictions on each product. Not every part on a vehicle page fits every engine or configuration.
Buick Century
Buick LeSabre
Buick Lucerne
Buick Park Avenue
Buick Reatta
Buick Rendezvous
Buick Riviera
Buick Terraza
Cadillac DeVille
Cadillac DTS
Cadillac Eldorado
Cadillac Seville
Chevrolet Celebrity
Chevrolet Lumina APV
Chevrolet Prizm
Chevrolet Uplander
Chevrolet Venture
Chrysler 200
Ford Transit Connect
Geo Prizm
Honda Fit
Hyundai Accent
Hyundai Veloster
Kia Forte
Kia Forte Koup
Kia Forte5
Kia Seltos
Kia Soul
Kia Soul EV
Nissan Cube
Nissan Sentra
Nissan Versa
Oldsmobile Aurora
Oldsmobile Cutlass Ciera
Oldsmobile Cutlass Cruiser
Oldsmobile Silhouette
Oldsmobile Toronado
Pontiac 6000
Pontiac Aztek
Pontiac Montana
Pontiac Trans Sport
Pontiac Vibe
Saturn Relay
Scion iQ
Scion tC
Scion xA
Scion xB
Scion xD
Toyota Corolla
Toyota Echo
Toyota Matrix
Toyota Prius
Toyota Prius Plug-In
Toyota Yaris
Volkswagen Passat
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
