Vulkan Lokring Refrigerator LOKRING 8.5/6 NR Ms 00 L13000674

Straight brass Lokring reducing connector for joining an 8.5 mm outside-diameter tube to a 6–6.35 mm outside-diameter tube in refrigeration systems.

Is This the Right Part?

Common Symptoms

• Refrigerant-line leak at a splice or connection
• Cooling loss caused by a leaking refrigeration-tube joint

Check Before Replacing

• Verify that the existing tube sizes are approximately 8.5 mm and 6–6.35 mm outside diameter before ordering.
• Inspect the suspected joint for visible oil residue or other evidence of a refrigerant leak.
• Confirm that the fitting has not already been swaged or crimped; the connection is intended as a permanent assembly.

Pro Tip

Part Details

Key Features

• Type 00 Lokring connector
• Straight reducing configuration
• 8.5 mm / 0.335 in tube side
• 6–6.35 mm / 0.236–0.250 in tube side
• Brass body (Ms)
• NR seal designation

Installation Notes

• Use only with tubing and tooling approved for the Lokring system.
• The fitting is installed by inserting the tube ends and swaging the rings with the appropriate Lokring tooling.
• The completed joint is permanent and should not be reused.
• Refrigeration sealed-system work should be performed by a qualified technician with the required refrigerant-handling equipment.

Verified Compatible Models

BI-36RG

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.