Samsung Dryer Door Assembly DV42H5200EP/AC – Fix a Damaged or Missing Dryer Door Fast
Need a complete dryer door for your Samsung DV42H5200EP/AC? This is a certified pre-owned door assembly pulled directly from a DV42H5200EP/AC unit in working condition. When a dryer door is cracked, broken at the hinge, or missing entirely, the dryer cannot run safely — the door switch won’t engage and the drum won’t spin. ⚡ Common damage point on high-use Samsung front-load dryers. This assembly is a direct-fit pulled replacement that includes all door sub-components — ready to install.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ You have a Samsung DV42H5200EP/AC electric dryer
- ✔ Your dryer door is cracked, broken, or missing
- ✔ The drum, motor, and controls function normally
- ✔ ONLY problem is the door assembly itself
Not sure? Send us your model number — we’ll confirm before you order.
🔧 Common Symptoms
- Dryer door cracked, split, or broken at the hinge or latch
- Dryer won’t start — door switch not engaging due to door damage
- Door glass shattered or missing
- Door handle broken off or latch mechanism failed
- Door seal/gasket torn causing heat loss and extended dry times
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, swapping the complete door assembly restores normal dryer operation immediately.
📦 Assembly Details
- Assembly: Complete Dryer Door — Certified Pre-Owned, pulled from DV42H5200EP/AC
- Condition: Used — inspected, functional. May have minor cosmetic scratches or imperfections.
-
Sub-Parts Included:
- DC97-15975E — Door Assembly
- DC63-01748B — Door Component
- DC64-02637A — Door Component
- Fits: Samsung DV42H5200EP/AC
While the door is off, inspect the door switch — a worn door switch is a common companion failure on Samsung front-load dryers and takes 5 minutes to replace while you already have the door removed. Also check the door strike (DC64-00828B) for wear before reinstalling.
⚙️ Installation
Skill Level: Easy — 20–30 minutes. Disconnect power before servicing. Remove the existing door by unscrewing the hinge screws and disconnecting the door switch wiring harness if applicable. Align the replacement door on the hinge mounts, reinstall screws, reconnect wiring, and test the door switch engagement before running a cycle. Do not overtighten hinge screws — snug is sufficient to avoid cracking the door frame.
✓ Compatible Models
Pulled from Samsung DV42H5200EP/AC. Fitment on other DV42H52xx variants should be verified before ordering. Contact us to verify your model number before ordering.
💡 Pro Tip
Before fitting the replacement door, test the door switch with a multimeter — it should show continuity when pressed and open when released. A failed door switch will prevent the dryer from starting even with a perfect door installed, and it’s a 5-minute swap while you already have access.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
