MEE64286101 LG Radiant Surface Element for Ranges, Fixes Small Burner Not Heating

🇺🇸 Matching U.S. Part Number: MEE64286101

MEE64286101 is the current genuine LG radiant surface element for compatible electric ranges. It replaces discontinued LG part number MEE62385001.

The approximately 5-1/2-inch, 1200-watt element mounts beneath the ceramic-glass cooktop and supplies heat to a small cooking zone.

A burned, cracked or electrically open element may cause the burner to remain cold, heat intermittently or heat unevenly.

Similar symptoms can also result from a defective surface-element switch, damaged wiring, burned terminals, a control-board fault or incorrect incoming voltage.

Confirm the complete range model, element position, diameter, wattage, terminals and mounting arrangement before ordering.

Is This the Right Part?

Confirm the complete model number before ordering. Similar LG radiant elements may differ in diameter, wattage, terminals, mounting brackets and limiter configuration.

Common Symptoms

• Small burner remains cold while other elements operate normally
• Burner heats intermittently or cuts out during use
• Element heats unevenly across the cooking zone
• Visible breaks, cracks or burned terminals on the existing element
• Error code or no-heat condition on one cooking zone only

Check Before Replacing

• Test the surface-element switch — a defective switch produces the same no-heat symptom
• Inspect the element terminals and wiring harness for burning, corrosion or loose connections
• Verify incoming voltage at the range terminal block — low voltage causes intermittent heating
• Check for a control-board fault if multiple zones are affected or error codes are present

Part Details

Installation Notes

1. Disconnect electrical power at the circuit breaker before lifting the cooktop or handling element wiring.
2. Photograph the existing element wiring, terminal positions and mounting arrangement before removal.
3. Compare the replacement element with the original — verify diameter, wattage, terminal type and limiter configuration.
4. Inspect nearby wiring, connectors and the element switch for heat damage before installing the new element.
5. Restore power and test all cooking zones for correct operation.

Use a qualified appliance technician when diagnosis or installation is outside your experience.

Verified Compatible Models

LDE3031ST, LDE3035SB, LDE3035ST, LDE3035SW, LDE3037BD, LDE3037SB, LDE3037ST, LDE3037SW, LDE4411ST, LDE4411ST/00, LDE4413BD, LDE4413BD/00, LDE4413ST, LDE4415BD, LDE4415BD/00, LDE4415ST, LDE4415ST/00, LDE5415ST, LRE3021ST, LRE3023ST, LRE3023SW, LRE3025ST, LRE3027ST, LRE3061BD, LRE3061BD/00, LRE3061ST, LRE3061ST/00, LRE3083BD, LRE3083SB, LRE3083ST, LRE3083SW, LRE3085ST, LRE3193BD, LRE3193BD/00, LRE3193SB, LRE3193SB/00, LRE3193ST, LRE3193ST/00, LRE3193SW, LRE3193SW/00, LRE4211ST, LRE4211ST/00, LRE4213ST, LRE4213ST/00, LRE4215BD, LRE4215BD/00, LREL6323D.FB2LLGA, LSE4611ST, LSE4611ST/00, LSE4613BD, LSE4613BD/00, LSE4613ST, LSE4613ST/00, LSSE3026ST, LSSE3026ST/00, LSSE3029BD, LSSE3029BD/00

Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering.