EXCESSIVE TUB VIBRATION OR BANGING DURING SPIN WHEN THE
LG Front-load washer Damper MCQ67392401, Fixes Excessive tub vibration or banging during spin when the damper is worn or defective
LG washer damper used in the suspension system to help control tub movement during operation.
Part MCQ67392401LG
LG washer damper used in the suspension system to help control tub movement during operation.
Is This the Right Part?
Part NumberMCQ67392401
ManufacturerLG
Appliance TypeFront-load washer
Part TypeDamper
Common Symptoms
- Excessive vibration during spin
- Loud banging or thumping during operation
- Washer tub moving excessively
Check Before Replacing
- With power disconnected, inspect the damper for visible damage, separation, or leakage if applicable.
- Check for excessive tub movement compared with normal operation.
- Confirm that the installed part number matches MCQ67392401 before ordering or replacing.
Pro Tip
Replace dampers as a matched set when multiple dampers show similar wear, but verify the washer’s parts diagram before ordering multiple units.
Part Details
Part NumberMCQ67392401
Part TypeDamper
ManufacturerLG
Appliance TypeFront-load washer
Primary FunctionDampens washer-tub movement and vibration during spin and wash cycles.
Key Features
- Genuine LG replacement part listing
- Part type: damper
- Washer suspension component
Installation Notes
- Disconnect electrical power before servicing the washer.
- Use the appliance model’s service documentation to confirm damper location and installation details.
- Do not substitute a similarly named damper without documented compatibility.
Verified Compatible Models
WM3175CW, WM3270CW, WM3370HVA, WM3670HVA, WM4270HWA, WM3370HVA/01
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
