LG Washer Single-Solenoid Water Inlet Valve 5220FR2006H, Replaces 5220FR2006Q, 5220FR1280F, 5220FR2006L

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Slow washer filling
• No hot water entering the washer
• Water continues entering when the washer is not calling for water
• Leak at or near the hot-water inlet valve

Check Before Replacing

• Verify the hot-water supply valve is fully open and the inlet hose is not kinked.
• After disconnecting power and water, inspect the hot-water hose connection and valve inlet screen for sediment or mineral restriction.
• If water continues flowing into the washer after the appliance is safely disconnected from electrical power, the valve may be mechanically stuck open; this observation alone does not confirm the valve is the only fault.
• Compare hot-water supply flow with the cold-water supply before condemning the valve.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and turn off the washer's water supplies before servicing.
• Be prepared for residual water when removing the supply hose or internal hose.
• Record connector placement before disconnecting the solenoid wire.
• Reconnect the internal hose, clamp, mounting hardware, solenoid connector, and external water hose securely before restoring water and power.
• Check for leaks and verify hot-water filling after installation.

Verified Compatible Models

LUWM101HWA, WM1388HW, WM1388HW - ABWEEUS, WM1388HW - ABWEPUS, WM3488HW, WM3499HVA, WM8100HVA, WM9000HVA, WM9500HKA, 40002, 40021, 40121, 40131, 40141, 40147, 40262, 40272, 40277, 40311, 79640021900, 79641572210

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.