LG Washer Water inlet valve screen / inlet filter screens (2-pack) AGM73269501, Replaces MDJ62664301, MDJ62664302

Genuine LG water inlet valve filter screen assembly. The screens install inside the washer water inlet valve or inlet hose connection and filter large sediment, dirt, and rust from incoming water. Documentation identifies the package as one blue screen and one orange screen.

Is This the Right Part?

Common Symptoms

• Washer fills slowly or takes unusually long to reach the required water level.
• Washer may display an IE or similar water-inlet error when the screen is clogged and water flow is restricted.
• Little or no water enters through the affected inlet when the screen is heavily blocked.
• Sediment or debris may pass into the inlet valve if the screen is damaged or missing.

Check Before Replacing

• Turn off the washer, unplug it, and close both hot- and cold-water supply faucets before inspection.
• Disconnect the inlet hoses and visually inspect the screens for rust, sand, lime scale, or other buildup.
• Check that the screens are present, properly seated, and not torn, crushed, or deformed.
• Inspect the inlet hoses and hose washers for kinks, blockage, or damage before attributing a fill problem to the screen.
• If appropriate for the washer model, rinse the screen with warm water and use a soft brush to remove buildup; reinstall it only after thorough rinsing.

Pro Tip

Part Details

Key Features

• Genuine LG water-inlet valve screen/filter-screen assembly.
• Two-screen package containing one blue screen and one orange screen.
• Installs inside the washer water inlet valve where the supply hose connects.
• Protects the inlet valve from incoming sediment and rust particles.

Installation Notes

• Disconnect electrical power and shut off both water supplies before installation.
• Remove the hot and cold inlet hoses from the back of the washer and account for residual water in the hoses.
• Carefully remove the old screens from the inlet valves and press the replacement screens fully into place without damaging the inlet openings.
• Rinse the screens before reinstalling and reconnect the hoses carefully to avoid cross-threading.
• Turn the water supplies back on and check the hose and valve connections for leaks before operating the washer.
• Do not operate the washer without the inlet screens installed.

Verified Compatible Models

79640441900, 79640448900, 79641002610, 79641002612, 79641003610, 79641272210, 79641372210, 79641372211, 79641379210, 79641728900, S3CW/00, S3MFBN, S3RERB, S3WERB, WM9500HKA

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.