LG Washer door boot gasket MDS64974802, Replaces MDS64974801

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water leaking at the front of the washer during operation
• Visible tear, crack, deformation, or misalignment in the door boot gasket
• Door may not close or lock properly if the gasket is damaged or misaligned
• Leak caused by hair, clothing, or other foreign material trapped between the gasket and door

Check Before Replacing

• With the washer unplugged, visually inspect the entire gasket for tears, cracks, holes, deformation, or separation from its seating groove.
• Pull back the gasket folds and check for hair, clothing, coins, or other foreign objects; remove debris carefully without puncturing the rubber.
• Check whether the gasket is evenly seated around the door opening and tub rim.
• Clean the gasket and door-contact surfaces, then observe whether leakage persists during a supervised test cycle.
• Do not assume the gasket is the cause if water originates from the dispenser, drain filter, hoses, or another location.

Pro Tip

Part Details

Installation Notes

• Unplug the washer before installation.
• Wear work gloves because access around the washer cabinet and gasket can involve sharp edges.
• Confirm the replacement part matches the washer model and the removed gasket before installation.
• Ensure the gasket is fully and evenly seated at the tub and door openings before operating the washer.
• After installation, inspect the seal position and perform a supervised leak check.

Verified Compatible Models

FH2F8ADYK8.ABSEEUS, FH3F7ADYK3.ABWEEUS, FH3F7ADYK7.ASSEEUS, WM9000HVA, WM9000HVA/00, WM9000HWA, WM9000HWA/00, WM9500HKA

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.