LG Washer door boot gasket MDS64974802, Replaces MDS64974801, Fixes Water leaking from the washer door area
Genuine LG OEM gray door boot gasket/gasket assembly that seals the wash-tub opening to the washer door and helps prevent water leaks.
Genuine LG OEM gray door boot gasket/gasket assembly that seals the wash-tub opening to the washer door and helps prevent water leaks.
Is This the Right Part?
Common Symptoms
- Water leaking at the front of the washer during operation
- Visible tear, crack, deformation, or misalignment in the door boot gasket
- Door may not close or lock properly if the gasket is damaged or misaligned
- Leak caused by hair, clothing, or other foreign material trapped between the gasket and door
Check Before Replacing
- With the washer unplugged, visually inspect the entire gasket for tears, cracks, holes, deformation, or separation from its seating groove.
- Pull back the gasket folds and check for hair, clothing, coins, or other foreign objects; remove debris carefully without puncturing the rubber.
- Check whether the gasket is evenly seated around the door opening and tub rim.
- Clean the gasket and door-contact surfaces, then observe whether leakage persists during a supervised test cycle.
- Do not assume the gasket is the cause if water originates from the dispenser, drain filter, hoses, or another location.
Pro Tip
Part Details
Key Features
- Genuine LG OEM washer door boot gasket
- Gray flexible sealing component
- Forms a seal between the wash tub and washer door
- Designed for select LG front-load washers
- Manufacturer substitution for prior part MDS64974801
- Part may differ in appearance from the prior number while serving as a functional equivalent
Installation Notes
- Unplug the washer before installation.
- Wear work gloves because access around the washer cabinet and gasket can involve sharp edges.
- Confirm the replacement part matches the washer model and the removed gasket before installation.
- Ensure the gasket is fully and evenly seated at the tub and door openings before operating the washer.
- After installation, inspect the seal position and perform a supervised leak check.
Verified Compatible Models
FH2F8ADYK8.ABSEEUS, FH3F7ADYK3.ABWEEUS, FH3F7ADYK7.ASSEEUS, WM9000HVA, WM9000HVA/00, WM9000HWA, WM9000HWA/00, WM9500HKA
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
