LG Washer Door seal / door gasket MDS65736908

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Front-door water leakage
• Visible tear, puncture, cracking, or deformation in the gasket
• Gasket slipping out of position or appearing improperly seated
• Dirt, hair, detergent residue, or mold buildup preventing a proper seal
• Musty odor associated with moisture retained in the gasket folds

Check Before Replacing

• With the washer empty and unplugged, inspect the gasket folds and door-contact surface for hair, foreign objects, residue, tears, punctures, or deformation.
• Check whether the gasket is evenly seated around the door opening and is not rolled, twisted, or pulled out of its groove.
• Clean accessible gasket surfaces with a damp cloth and check whether the suspected leak is actually coming from the door area rather than the drain filter, dispenser, hose, or another location.
• If the gasket is torn or punctured, stop using the washer until the seal is repaired or replaced; do not treat this visual check as a complete diagnosis.

Pro Tip

Part Details

Installation Notes

• Disconnect power before attempting any service and follow the model-specific LG service or repair instructions.
• The replacement gasket must be evenly seated in its groove and aligned with any molded openings, ports, or features present on the original part.
• Retaining clamps or springs must be fully and evenly secured; improper seating can cause leakage or interfere with door operation.
• After reassembly, inspect the seal around the entire circumference before operating the washer. If testing is performed, use a short empty cycle and watch for leaks.
• Because front-load gasket removal and clamp installation can be difficult and model-specific, use an authorized technician if the correct procedure or retention hardware is unclear.

Verified Compatible Models

F1P1CNV2BC, F1P1CNV2W, F1P1CNV4WC, F1P1CNV5WC, F1P1CYV2B, F1P1CYV2W, F51P12B, F51P12WH, F51P14WH, F71P12BS, F71P12IX, F71P12WH, F71P12WHS, WM3800HBA

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.