LG Washer Leaking from the Door? Door Gasket MDS66290825 – Fix Door Seal Failure Fast
A torn or deteriorated front-load washer door gasket lets water escape every cycle — soaking your floor and risking damage to cabinetry and flooring beneath the machine. In most LG front-load washers, this is caused by a failed door boot gasket. When it fails, the airtight seal between the door glass and the drum is lost, allowing water to leak during wash and spin cycles, and often producing a persistent musty odor from trapped moisture in the damaged seal. ⚡ Common failure point on LG front-load washers — especially in high-use households. Part MDS66290825 is the current genuine OEM replacement that restores a watertight door seal and stops leaks immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your washer powers on and runs cycles normally
- ✔ The door latch and hinge are confirmed undamaged
- ✔ Water supply hoses and inlet valves are confirmed OK
- ✔ ONLY problem is water leaking from around the door during or after a wash cycle
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Water pooling on the floor in front of the washer during or after a cycle
- Visible tears, cracks, holes, or mold damage on the door boot seal
- Musty or mildew odor from the gasket area that doesn’t clear with cleaning
- Door seal feels stiff, brittle, or has lost its flexibility and no longer seats flush
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this door gasket restores a watertight seal and stops leaking immediately.
📦 Part Details
- Part Number: MDS66290825
- Type: Front-Load Washer Door Boot Gasket – Drum-to-Door Airtight Seal
- Replaces: MDS66290815, MDS66290805 — no modification required
- Brands: LG
While the door gasket is removed, clean the gasket channel and drum lip thoroughly and inspect the door hinge pins for wear or play. A sagging door accelerates gasket wear unevenly — if the door droops when open, replacing the hinge at the same time ensures the new gasket seats evenly and achieves its full service life. Also run a drum-clean cycle after installation to eliminate any mold or residue from the old seal.
⚙️ Installation
Skill Level: Moderate — 30–45 minutes. Disconnect power before servicing. Remove the retaining band clamp securing the gasket to the front panel using a flathead screwdriver or band clamp tool, peel the old gasket away from the drum lip and door opening, clean the channel and drum edge thoroughly, then seat the new gasket starting at the top and working around the perimeter before reinstalling the clamp. Run a short rinse cycle and inspect the door perimeter for leaks before returning the machine to service.
✓ Compatible Models
Confirmed compatible with WM4100HBA and related LG front-load washer models. Contact us to verify your model number before ordering.
💡 Pro Tip
Front-load washer door gaskets fail prematurely due to trapped moisture, detergent residue, and mold growth in the folds of the seal. After every wash, wipe the gasket dry with a cloth and leave the door ajar to allow airflow. Once a month, run a hot drum-clean cycle with a washer cleaner tablet. This simple habit can double the lifespan of a new gasket and prevent the musty odor that signals early seal deterioration.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
