Menu
Is This the Part You Need?
If your LG gas range oven won't heat, you smell gas without ignition, or the burner clicks endlessly without lighting, the oven igniter is the most common cause. Part number MEE61841401 is the correct OEM igniter for a wide range of LG freestanding and slide-in gas ranges across the LRG, LDG, LSG, LTG, LRGL, LSGL, and LUTG series. A failed igniter means no heat — this is a direct-fit replacement requiring no modification.
✓ Common Symptoms This Part Fixes
- Oven won't heat or ignite at all
- Gas smell in oven cavity without a flame
- Oven takes extremely long to reach temperature
- Clicking sound from oven but no flame appears
- Oven burner lights intermittently or unreliably
- Surface burners work fine but oven won't fire
- Oven shuts off mid-cycle before reaching set temperature
✓ Part Details
- OEM Part Number: MEE61841401
- XPart Cross-Reference: MEE61841401XP
- Universal Cross-Reference: MEE61841401XPRO
- Replaces: MEE61841403, MEE62306201, MEE63084901, DS024KX
- Fits: LG gas ranges — LRG, LDG, LSG, LTG, LRGL, LSGL, LUTG series
- Type: Oven burner igniter (hot surface igniter)
- Fit: Direct OEM replacement — no modification required
- Condition: New
✓ Installation Notes
- Skill Level: Intermediate DIY — basic hand tools required
- Disconnect power and shut off the gas supply before starting
- Remove oven racks and the oven bottom panel to access the burner assembly
- The igniter mounts near the burner via two screws and a wire harness connector
- Do not touch the igniter element with bare hands — skin oils reduce lifespan
- Reconnect harness, reassemble, restore power and gas, then test with a bake cycle
- If oven still won't ignite after replacement, test the gas valve solenoid next
✓ Compatible Models
LRG3093SB LRG3093ST LRG3095SB LRG3095ST LRG3081ST LRG3085ST LRG4113ST LRG4115ST LDG3015ST LDG3016ST LDG4313ST LDG4315ST LSG4511ST LSG4513ST LTG4715ST LUTG4519SN LRGL5825D LRGL5823D LSGL6337F Don't see your model? Contact us
💡 Pro Tip — While You're In There:
If the igniter was glowing but the oven still wasn't lighting, the gas valve solenoid is the next likely failure point — it's what opens the gas flow once the igniter reaches temperature. Replacing both in the same service call saves a second labour visit. Also inspect the igniter mounting bracket for cracks; a loose igniter won't reach the correct temperature threshold to open the valve.
If the igniter was glowing but the oven still wasn't lighting, the gas valve solenoid is the next likely failure point — it's what opens the gas flow once the igniter reaches temperature. Replacing both in the same service call saves a second labour visit. Also inspect the igniter mounting bracket for cracks; a loose igniter won't reach the correct temperature threshold to open the valve.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
