LOWER-RACK TINE ROWS ARE LOOSE OR WILL NOT REMAIN UPRIGHT
LG Dishwasher Lower Rack Holder MEG64438801, Fixes Lower-rack tine rows are loose or will not remain upright
Genuine LG lower-rack tine-row pivot clip/holder. It secures fold-down tine rows to the lower dishrack and allows them to pivot between upright and lowered positions. Also identified as a rack tine clip, fence bracket, tine-row bracket, retainer comb, or comb retainer.
Part MEG64438801LG
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberMEG64438801
ManufacturerLG
Appliance TypeDishwasher
Part TypeDishwasher Lower Rack Holder
Common Symptoms
- A tine row wobbles or collapses during loading or washing.
- The fold-down tines do not pivot or lock correctly.
- A tine-row clip is cracked, broken, loose, or missing.
- Dishes shift or become less stable because the tine row is not secured.
Check Before Replacing
- With the dishwasher empty and power disconnected, visually inspect the holder for cracks, deformation, looseness, or absence.
- Gently move the affected lower-rack tine row by hand to check whether it pivots at its intended point and remains supported.
- Compare the affected holder with an intact holder on the rack, if present, to check for a missing or visibly damaged clip.
- Confirm the replacement part number against the dishwasher model and the existing rack configuration before installation.
Pro Tip
Photograph or observe the intact opposite-side holder before removing the damaged clip; the replacement is designed to clip onto the rack, and correct orientation is important for tine-row movement.
Part Details
Part NumberMEG64438801
Part TypeDishwasher Lower Rack Holder
ManufacturerLG
Appliance TypeDishwasher
Primary FunctionSecures the lower dishwasher rack’s fold-down tine rows at their pivot points while allowing the rows to move between upright and lowered positions.
Installation Notes
- Disconnect dishwasher power and utilities before service, and wear work gloves to protect against sharp rack wire or edges.
- Remove the lower rack as needed to access the tine-row holder.
- Use the intact rack arrangement or the owner’s documentation to orient the replacement correctly.
- Clip the holder onto the rack at the tine-row pivot location and verify that the tine row moves and is retained without binding.
- Confirm the model and part number before installation; similar-looking rack parts may vary in size or shape.
Verified Compatible Models
ADFD5448AT, LDB4548ST, LDF5545ST, LDF5545WW, LDF5678ST, LDFC2423C, LDFC2423V, LDFC2423W, LDFN343LS, LDFN454HT, LDFN3432T, LDFN4542W, LDP5676BD, LDP6797BD, LDP6797ST
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
