Panasonic 24-inch Stainless Steel Microwave Trim Kit NNTK714SS

Panasonic stainless-steel trim kit for installing select Panasonic countertop microwave ovens into a cabinet opening.

Is This the Right Part?

Common Symptoms

• Damaged, bent, or missing microwave trim
• Improperly finished cabinet installation caused by a missing or damaged trim kit

Check Before Replacing

• Verify the microwave model against Panasonic's compatibility list before ordering.
• Measure the cabinet opening; Panasonic specifies an opening approximately 23 5/8 inches wide, 15 9/16 inches high, and 21 inches deep.
• Confirm the existing or planned microwave installation has adequate clearance and ventilation for this trim kit.

Pro Tip

Part Details

Key Features

• Stainless-steel finish
• 24-inch class trim kit
• Outside width: 23 7/16 inches (596 mm)
• Outside height: 16 1/8 inches (410 mm)
• Required cabinet opening width: 23 5/8 inches (600 mm)
• Required cabinet opening height: 15 9/16 inches ± 5/32 inches (395 mm ± 4 mm)

Installation Notes

• Unplug the microwave before attempting installation.
• Follow the Panasonic installation instructions and do not modify the trim kit or microwave.
• Protect the power cord from being pinched during installation.
• Use the kit only with a Panasonic microwave model listed as compatible.
• Verify the cabinet opening and required ventilation clearances before installation.

Verified Compatible Models

NNP794S, NNSA770S, NNSD755S, NNSD763S, NNSD765S, NNSD773S, NNSD780S, NNSD786S, NNSD797S, NNSE792S, NNSE795S, NNSE796S, NNSN790S, NNST762S, NNST765S, NNST775S, NNST785S, NNT795S, NNSD765SC, NNSD78LS, NNSD78LSC, NNSE795SC

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.