Range Burner Not Clicking or Igniting? GE Plunger Switch WS01F01556 – Fix Ignition Failure Fast
If one or more burners on your GE range click continuously, fail to ignite, or produce no spark at all, the plunger switch is the most common cause. In most GE and Hotpoint gas ranges, this is caused by a failed plunger switch. When it fails, the igniter for that burner will not activate when the knob is turned, or it may spark non-stop even when the burner is off. ⚡ Common failure point in GE-built gas ranges and cooktops. Part WS01F01556 is the genuine OEM replacement that restores proper spark ignition and eliminates continuous clicking immediately upon installation.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Appliance powers on and gas supply is confirmed OK
- ✔ Other burners ignite normally (issue is isolated to one burner)
- ✔ Igniter and spark module have been ruled out
- ✔ ONLY problem is no click/spark when knob is turned, or continuous clicking when burner is off
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Burner knob turned but no clicking or spark produced
- Igniter clicks continuously even when burner is off
- Burner lights manually but won't auto-ignite
- Intermittent ignition — sometimes works, sometimes doesn't
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this plunger switch restores normal ignition operation immediately.
📦 Part Details
- Part Number: WS01F01556
- Type: Surface Burner Plunger Switch — Gas Range Ignition
- Replaces: WB24K10068, 223C4403P002
- Brands: GE, Hotpoint, GE Appliances
While the burner assembly is accessible, inspect the spark igniter electrode and igniter wire harness for cracking or corrosion — replacing a worn igniter at the same time eliminates a second disassembly and ensures reliable ignition across all burners.
⚙️ Installation
Skill Level: EASY — 15–25 Minutes. Disconnect power before servicing. Remove the burner grate and cap to access the switch beneath the cooktop surface, disconnect the wire terminals from the old switch, snap the new plunger switch into position, reconnect the terminals, and reassemble the burner components.
✓ Compatible Models
Confirmed compatible with GE and Hotpoint freestanding and slide-in gas ranges. Contact us to verify your model number before ordering.
💡 Pro Tip
If one plunger switch has failed, the others on the same range are likely the same age and subject to the same wear. Replacing all burner switches during the same repair visit prevents repeat failures and saves significant labour time — especially on ranges with 4 or 5 burners.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
