MICROWAVE MAY NOT RECOGNIZE A FULLY CLOSED DOOR OR DRAWER AND MAY NOT START A COOK CYCLE
Sharp Microwave Secondary interlock switch / door-sensing switch; also identified in some Sharp documentation as a damper, primary interlock, or third-door switch QSW-MA168WRZZ, Fixes Microwave may not recognize a fully closed door or drawer and may not start a cook cycle
Sharp OEM microwave safety interlock switch used for door sensing and interlock control. The exact function label varies by microwave model and service documentation.
Part QSW-MA168WRZZSharp
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberQSW-MA168WRZZ
ManufacturerSharp
Appliance TypeMicrowave
Part TypeSecondary interlock switch / door-sensing switch; also identified in some Sharp documentation as a damper, primary interlock, or third-door switch
✅ Cross Reference Information
Current Part NumberQSW-MA168WRZZ
Common Symptoms
- Microwave does not start or intermittently starts only after the door/drawer is fully latched.
- A fuse may open during door/drawer operation when an interlock fault is present.
- If cooking does not stop when the door/drawer opens, discontinue use immediately; the interlock system requires qualified service.
Check Before Replacing
- With power disconnected, inspect only externally accessible door/drawer latch areas for obstruction, damage, or abnormal looseness; do not remove the outer case or touch internal wiring.
- Confirm the door or drawer closes, latches, and opens smoothly. The applicable service procedure requires correct latch-hook alignment for the interlock switches to actuate.
- Do not attempt energized continuity testing or bypass any microwave safety switch. A qualified technician should verify switch sequencing, continuity, latch adjustment, and post-service microwave-leakage compliance using the model-specific service information.
Pro Tip
This same part number can occupy different switch roles and positions by model. Match the exact model’s service diagram and transfer wire connections one-for-one; never substitute position or terminal routing based only on the part label.
Part Details
Part NumberQSW-MA168WRZZ
Part TypeSecondary interlock switch / door-sensing switch; also identified in some Sharp documentation as a damper, primary interlock, or third-door switch
ManufacturerSharp
Appliance TypeMicrowave
Primary FunctionDoor/drawer-actuated microwave interlock and sensing switch; depending on the Sharp model/location, it serves as a secondary interlock, door-sensing/third-door switch, or damper switch.
Installation Notes
- Microwave servicing exposes high-voltage components and requires qualified-service procedures; do not open the cabinet for DIY replacement.
- Use the service documentation for the exact model because QSW-MA168WRZZ may be installed in different interlock or damper-switch locations.
- The Sharp service procedure calls for correct latch-hook/switch alignment and verification of monitor/interlock operation after reassembly.
- After any door, drawer, latch, or interlock servicing, the applicable Sharp procedure requires a microwave-leakage check with an approved survey meter.
Verified Compatible Models
KB6524PS, KB6525PS, R1881LSY, SMC1585BB, SMC1585BS, SMC1585BW, SMD2470AH, SMD2470AS, SMD2470ASY, SMD2477AHC, SMD2480CS, SMD2480CSC, SMD2489ES, SMD3070AS, SMD3070ASY
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
