HVAC Motor Not Starting? Run Capacitor 36-40R3744 — Fixes Weak Motor Starting / Restores 40MFD Run Capacitance
If your HVAC motor hums but won’t start, runs weakly, or draws excessive current, a failed run capacitor is one of the most common causes. In PSC (permanent split capacitor) motors, the run capacitor provides continuous phase-shift support while the motor is operating. When it fails, the motor loses efficiency, struggles to start, or stops running entirely. ⚡ Common failure point in condenser fan motors, blower motors, and compressor circuits. Part 36-40R3744 is the Rotom OEM replacement that restores proper run capacitance to compatible 40MFD PSC motor circuits.
🇺🇸 Matching U.S. Part Number: 36-40R3744
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Motor circuit is confirmed to require a single 40MFD run capacitor (not a dual-run capacitor)
- ✔ Electrical supply to the unit is confirmed OK
- ✔ Motor windings are not open or shorted
- ✔ ONLY problem is the motor failing to start, humming, or running below rated speed
Not sure? Send us your model number — we’ll confirm before you order.
🔧 Common Symptoms
- Motor hums but won’t start or start is sluggish
- Fan or blower runs at reduced speed
- Motor overheats or trips thermal overload
- Unit draws higher than normal current
- Capacitor is visibly bulged, leaking, or measures out of spec
✔ If these symptoms match, this is the most likely failed component in the motor circuit.
✔ In most cases, replacing the run capacitor restores normal motor operation immediately.
📦 Part Details
- Part Number: 36-40R3744
- Type: Single motor-run capacitor (not a dual-run, not a start capacitor)
- Capacitance: 40 µF
- Voltage: 370/440 VAC
- Shape: Round
- Diameter: 2.00 in (50 mm)
- Height: 4.33 in (110 mm)
- Features: Built-in pressure interrupter; UL and cUL recognized
- Brand/OEM: Rotom / AllTemp
- Direct Round Equivalents: PPS40440RD, PRCF40, TRCF40, 45400R, TP40440R, CR40X440R, LCR40X440R, P291-4004R, 14245
Inspect the motor windings and contactor at the same time. A capacitor that has failed due to age or heat stress often indicates the motor itself is approaching end of life. Confirming motor condition during the same service call prevents a repeat failure.
⚙️ Installation
Skill Level: Moderate — 20 to 45 minutes. Disconnect and lock out power to the unit before opening the electrical compartment. Capacitors retain a hazardous charge after power is removed — discharge safely before handling. Match the terminal connections exactly to the original wiring. Confirm mounting strap diameter and cabinet clearance before installing — dimensions vary between equivalent brands. Diagnosis and replacement should be completed by a qualified HVAC technician.
✓ Compatible Models
Compatibility for this capacitor is specification-based. Capacitance must remain exactly 40MFD, and the replacement voltage must equal or exceed the original equipment requirement. Confirm the round shape and dimensions (2.00” × 4.33”) fit the mounting strap and cabinet clearance before ordering. Contact us to verify your model number before ordering.
💡 Pro Tip
The 36-40R3744 is a single run capacitor with one capacitance value (40MFD) and two terminals. A dual run capacitor has two values (e.g., 40/5MFD or 40/7.5MFD) and three terminals (C, FAN, HERM). Installing the wrong type will damage the motor circuit. The oval counterpart to this part is 36-40-370440 — electrically identical but requires a different mounting strap. Always read the label on the old capacitor directly before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
