HVAC Motor or Compressor Not Running? Run Capacitor 36-70R3744 — Restores 70MFD Motor Run Capacitance
If your HVAC motor or compressor hums but won’t start, runs weakly, or draws excessive current, a failed run capacitor is one of the most common causes. In PSC (permanent split capacitor) motors and compressors, the run capacitor provides continuous phase-shift support while the equipment is operating. When it fails, the motor or compressor loses efficiency, struggles to start, or stops running entirely. ⚡ Common failure point in high-capacity condenser fan motors, blower motors, and compressor circuits. Part 36-70R3744 is the Rotom OEM replacement that restores proper run capacitance to compatible 70MFD PSC motor and compressor circuits.
🇺🇸 Matching U.S. Part Number: 36-70R3744
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Motor or compressor circuit is confirmed to require a single 70MFD run capacitor (not a dual-run capacitor)
- ✔ Electrical supply to the unit is confirmed OK
- ✔ Motor or compressor windings are not open or shorted
- ✔ ONLY problem is the motor or compressor failing to start or running below rated speed
Not sure? Send us your model number — we’ll confirm before you order.
🔧 Common Symptoms
- Motor or compressor hums but won’t start or start is sluggish
- Fan or blower runs at reduced speed
- Motor or compressor overheats or trips thermal overload
- Unit draws higher than normal current
- Capacitor is visibly bulged, leaking, or measures out of spec
✔ If these symptoms match, this is the most likely failed component in the motor or compressor circuit.
✔ In most cases, replacing the run capacitor restores normal operation immediately.
📦 Part Details
- Part Number: 36-70R3744
- Type: Single motor-run capacitor (not a dual-run, not a start capacitor)
- Capacitance: 70 µF
- Voltage: 370/440 VAC
- Shape: Round
- Diameter: 2.36 in
- Height: 4.72 in
- Features: Heavy-duty compact construction; built-in pressure interrupter; UL and cUL recognized
- Brand/OEM: Rotom / AllTemp
- Direct Round Equivalents: CR70X440R, PRCF70, PRCF70A, TRCF70, 12758, 14258, USA2228
Inspect the contactor and motor or compressor windings at the same time. A capacitor that has failed due to age or heat stress often indicates the motor itself is approaching end of life. Confirming motor condition during the same service call prevents a repeat failure.
⚙️ Installation
Skill Level: Moderate — 20 to 45 minutes. Disconnect and lock out power to the unit before opening the electrical compartment. Capacitors retain a hazardous charge after power is removed — discharge safely before handling. Match the terminal connections exactly to the original wiring. Confirm mounting strap diameter and cabinet clearance before installing — dimensions vary between equivalent brands. Diagnosis and replacement should be completed by a qualified HVAC technician.
✓ Compatible Models
Compatibility for this capacitor is specification-based. Capacitance must remain exactly 70MFD, and the replacement voltage must equal or exceed the original equipment requirement. Confirm the round shape and dimensions (2.36” × 4.72”) fit the mounting strap and cabinet clearance before ordering. Contact us to verify your model number before ordering.
💡 Pro Tip
The 36-70R3744 is a single run capacitor with one capacitance value (70MFD) and two terminals. A dual run capacitor has two values (e.g., 70/5MFD) and three terminals (C, FAN, HERM). Installing the wrong type will damage the motor or compressor circuit. Always verify the original capacitor type and rating before ordering. Note: part number 12922 is an 85/10MFD dual-run capacitor and is not a valid substitute for this 70MFD single run unit.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
