HVAC Motor or Compressor Not Running? Run Capacitor 36-80R3744 — Fix Starting Failure Fast

If your HVAC motor or compressor hums but won’t start, runs weakly, or draws excessive current, a failed run capacitor is one of the most common causes. In PSC (permanent split capacitor) motors and compressors, the run capacitor provides continuous phase-shift support while the equipment is operating. When it fails, the motor or compressor loses efficiency, struggles to start, or stops running entirely. ⚡ Common failure point in high-capacity condenser fan motors, blower motors, and compressor circuits. Part 36-80R3744 is the Rotom OEM replacement that restores proper run capacitance to compatible 80MFD PSC motor and compressor circuits.

🇺🇸 Matching U.S. Part Number: 36-80R3744

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Motor or compressor circuit is confirmed to require a single 80MFD run capacitor (not a dual-run capacitor)
• ✔ Electrical supply to the unit is confirmed OK
• ✔ Motor or compressor windings are not open or shorted
• ✔ ONLY problem is the motor or compressor failing to start or running below rated speed

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

• Motor or compressor hums but won’t start or start is sluggish
• Fan or blower runs at reduced speed
• Motor or compressor overheats or trips thermal overload
• Unit draws higher than normal current
• Capacitor is visibly bulged, leaking, or measures out of spec

✔ If these symptoms match, this is the most likely failed component in the motor or compressor circuit.

✔ In most cases, replacing the run capacitor restores normal operation immediately.

📦 Part Details

• Part Number: 36-80R3744
• Type: Single motor-run capacitor (not a dual-run, not a start capacitor)
• Capacitance: 80 µF
• Voltage: 370/440 VAC
• Shape: Round
• Diameter: 2.36 in
• Height: 5.12 in
• Features: Built-in pressure interrupter; UL and cUL recognized
• Brand/OEM: Rotom / AllTemp
• Direct Round Equivalents: PRCF80, PRCF80A, TRCF80, PPS80440RD, 45800R, TP80440R, CR80X440R, LCR80X440R, 14259, USA2229

⚙️ Installation

Skill Level: Moderate — 20 to 45 minutes. Disconnect and lock out power to the unit before opening the electrical compartment. Capacitors retain a hazardous charge after power is removed — discharge safely before handling. Match the terminal connections exactly to the original wiring. Confirm mounting strap diameter and cabinet clearance before installing — dimensions vary between equivalent brands. Diagnosis and replacement should be completed by a qualified HVAC technician.

✓ Compatible Models

Compatibility for this capacitor is specification-based. Capacitance must remain exactly 80MFD, and the replacement voltage must equal or exceed the original equipment requirement. Confirm the round shape and dimensions (2.36” × 5.12”) fit the mounting strap and cabinet clearance before ordering. Contact us to verify your model number before ordering.

💡 Pro Tip