DD93-01014A Duct Assembly

Samsung Dishwasher Duct Assembly DD93-01014A

Price
$145.52

Frequently Bought Together

Confirm This Fits Your Model
Not sure where to find your model number? See guide →
Steam Leaking or Moisture Buildup Around Door

Samsung DD93-01014A Dishwasher Duct Assembly, Fixes Steam and Condensation Leaks

Restores proper steam routing and condensation control — stops moisture escaping around the door or cabinet

Part DD93-01014A OEM Samsung Dishwasher Duct Assembly

The Samsung DD93-01014A Duct Assembly is designed to route steam and condensation away from the dishwasher door seal and interior cavity during wash and dry cycles. When this duct cracks, warps, or becomes dislodged, steam escapes into the surrounding cabinetry or around the door — causing moisture damage, poor drying performance, and condensation buildup on nearby surfaces. No superseded part numbers are currently confirmed for this item.

Is This the Right Part?

Part NumberDD93-01014A
ReplacesConfirm via model number
ManufacturerSamsung
Appliance TypeDishwasher

Confirm the complete model number before ordering. Similar duct assemblies may differ in routing geometry, clip positions, or attachment points depending on model revision.

Common Symptoms

  • Steam escaping around the dishwasher door or into cabinetry during the cycle
  • Moisture or water collecting on cabinet surfaces near the dishwasher
  • Poor drying performance — dishes wet at the end of the dry cycle
  • Visible cracking, warping, or dislodgement of the duct assembly

Check Before Replacing

  • Inspect the duct for visible cracks, broken clips, or warped sections
  • Check that the duct is fully seated and clipped into its mounting points — it may have simply come loose
  • Inspect the door gasket/seal for independent damage that could also cause steam to escape
  • Verify the rinse aid dispenser is set correctly — excess rinse aid can increase steam volume during drying
Pro Tip: A damaged or misaligned door gasket can produce identical symptoms to a failed duct assembly. Before ordering, run the dishwasher and observe whether steam is coming from the duct routing path specifically, or from the full perimeter of the door seal — this will help confirm which part is at fault.

Part Details

Part TypeDuct Assembly
Primary FunctionRoutes steam and condensation away from door and cabinetry during wash and dry cycles
Key FeatureClip-mount design — no special tools required for installation
ConditionOEM — Genuine Samsung

Installation Notes

  1. Disconnect power to the dishwasher before beginning.
  2. Photograph the existing duct routing, clips, and mounting positions before removal.
  3. Carefully unclip or unmount the old duct assembly — note the routing path precisely.
  4. Compare the new DD93-01014A with the original part before installation.
  5. Seat and clip the new duct fully into all mounting points, confirming it follows the original routing path.
  6. Restore power and run a test cycle — check for steam escape around the duct path and door area.

Use a qualified technician when diagnosis or installation is outside your experience.

Verified Compatible Models

Confirm your full Samsung dishwasher model number — including all suffixes and revision digits — before ordering. Contact us with your model number and we'll verify compatibility.

Fitment reminder: Match the complete model number, including suffixes and revision digits, before ordering.

✅Compatibility & Cross Reference

Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.

Buy Online Pick Up In-Store

Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
Get Directions