THUMPING, SQUEALING, OR GRINDING NOISES
Samsung Dryer Maintenance Kit DC97-16782A, Fixes Thumping, squealing, or grinding noises
Samsung dryer maintenance kit containing drum-support roller components DC97-16782A, idler assembly DC93-00634A, and drive belt 6602-001655. Component reference numbers apply to the individual pieces, not to the complete kit. Confirm the complete dryer model number before ordering.
Roller DC97-16782AIdler DC93-00634ABelt 6602-001655
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberDC97-16782A
ManufacturerSamsung
Appliance TypeDryer
Part TypeDryer Maintenance Kit
Verified Component References
Component-level references only: These numbers apply to the individual roller, idler, or belt. They are not interchangeable complete-kit part numbers.
Drum Support Roller — DC97-16782AEarlier / substitute numbers: DC97-07523A, DC97-07523B, DC97-16782C
Catalog refs: AP5325135, PS4221885
Catalog refs: AP5325135, PS4221885
Idler Pulley Assembly — DC93-00634AEarlier / substitute numbers: 12002777, 35001083, 35001098, 35001276, DC61-01215A, DC61-01230B, DC96-00882B, DC96-00882C, DC97-07509B
Catalog refs: AP6038887, PS11771601
Catalog refs: AP6038887, PS11771601
Drive Belt — 6602-001655Earlier / substitute number: 6602-001314
Catalog refs: AP4373659, PS4133825
Catalog refs: AP4373659, PS4133825
Common Symptoms
- Thumping, squealing, or grinding noises
- Drum not turning or turning intermittently
- Belt slippage or breakage
- Dryer stops mid-cycle due to support failure
- Uneven or rough drum rotation
- Visible roller or idler wear
Pro Tip
Replace all rollers and idler at the same time for best results.
Part Details
Part NumberDC97-16782A
Part TypeDryer Maintenance Kit
ManufacturerSamsung
Appliance TypeDryer
Installation Notes
- CRITICAL SAFETY WARNING:
- Unplug dryer before servicing.
- Unplug dryer
- from power.
- Remove top and front panels
- to access drum and support assembly.
- Release drum belt from idler pulley and motor shaft.
- Lift out drum carefully.
- Remove old support rollers, idler arm, and belt.
- Clean all mounting points and vacuum lint/debris.
- Install new support rollers and secure with retaining clips.
- Install new idler arm and ensure spring tension is correct.
- Install new drive belt around drum, idler, and motor pulley.
- Reinstall drum, ensuring belt is properly routed.
- Reassemble front and top panels.
- Plug in dryer and test for smooth, quiet operation.
- Safety Notes:
- Replace all rollers at once for balanced drum support. Lubricate roller shafts with high-temp grease if specified.
Verified Compatible Models
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
