Refrigerator Sealed System Service? Access Valve SAV-4 – Pressure Check & Recharge Fast
If you need to check pressure, charge refrigerant, or evacuate a refrigerator sealed system, the SAV-4 access valve is the correct service fitting. In refrigeration systems, a reliable 1/4" access valve is essential for any sealed system work — without one, you cannot connect gauges, pull a vacuum, or add refrigerant safely. ⚡ Standard service component for refrigerator sealed system maintenance and repair. Part SAV-4 is a direct-fit 1/4" access valve with copper tube that installs quickly and provides a secure, leak-free connection for all sealed system service procedures.
❓ Is This the Right Part?
This is the correct part if ALL of the following are true:
- ✔ You are servicing a refrigerator sealed system (pressure check, evacuation, or recharge)
- ✔ The system requires a 1/4" access port fitting
- ✔ You need a weld-on or braze-on access valve with copper tube stub
- ✔ Your existing access valve is leaking, damaged, or absent
- ✔ You are a licensed HVAC/R technician or qualified service professional
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Applications
- Refrigerant pressure testing — most common sealed system diagnostic step
- System evacuation before refrigerant recharge
- Refrigerant charging after compressor replacement
- Leak detection access point installation
- Sealed system retrofit or repair on older refrigerators without factory access ports
- Replacement of leaking or damaged existing access valves
✔ If these applications match your job, this is the correct service fitting for the task.
✔ In most cases, the SAV-4 installs in minutes and provides a permanent, leak-free service port.
📦 Part Details
- Part Number: SAV-4
- Type: 1/4" Refrigerator Access Valve with Copper Tube — Braze-On Service Fitting
- Replaces: Direct-fit access valve — supersedes 02-C31004-B, 85-C31004, 902519, A31004, C31004, C31004-1, C31004101, CDN10050, CDN10056, SAV4, 65437, AF1200, WR49M266, DJAF1200SV404 (no modification required)
- Brands: Universal fit — compatible with GE, Frigidaire, Whirlpool, and most refrigerator sealed systems requiring a 1/4" access port
Always install a valve core and cap after fitting the access valve to prevent refrigerant loss and contamination between service calls. If replacing a compressor at the same time, confirm the correct refrigerant type and charge weight before recharging the system.
⚙️ Installation
Skill Level: ADVANCED — Licensed HVAC/R Technician Required. Recover all refrigerant before beginning — this fitting is installed on the sealed refrigerant system and must be performed by a certified technician in Canada. Clean the installation point on the refrigerant line, braze the copper tube stub securely, and allow to cool fully before pressure testing. Do not install on a pressurized system — always recover refrigerant first and leak-test after installation before recharging.
✓ Compatible Applications
Compatible with refrigerator sealed systems requiring a standard 1/4" braze-on access valve, including GE, Frigidaire, Whirlpool, Maytag, KitchenAid, and Electrolux models. Contact us to verify compatibility before ordering.
When adding an access valve for a sealed system repair, install one on both the high side and low side at the same time — this gives you full gauge manifold access for future service calls without additional brazing. The cost difference is minimal and eliminates a repeat brazed fitting job on the next service visit.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
All brand names are the property of their respective owners and are used for compatibility reference only.
- Choosing a selection results in a full page refresh.
