Fridge Water Taste Off or Filter Light On? Frigidaire Water Filter ULTRAWFC – Fix It Fast
If your Frigidaire refrigerator is dispensing bad-tasting water or the filter indicator light won't reset, a clogged or expired water filter is almost always the cause. In most Frigidaire and Electrolux refrigerators, the internal water filter degrades over time, allowing chlorine, sediment, and odour-causing compounds to pass through unfiltered. When it fails, water tastes metallic or chlorinated, ice develops an off-flavour, and the filter warning light stays on even after a reset attempt. ⚡ One of the most common service calls on Frigidaire French door and side-by-side models. Part ULTRAWFC is the genuine OEM replacement that restores clean, filtered water and clears the filter indicator — no tools required.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Fridge powers on and cools normally
- ✔ Water dispenser and ice maker are mechanically functional
- ✔ Household water supply pressure is confirmed OK
- ✔ ONLY problem is bad-tasting water, low flow, or filter warning light
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Water from dispenser tastes like chlorine, metal, or has an off odour
- Ice cubes have a strange taste or smell
- Filter indicator light is on or won't reset
- Noticeably reduced water flow from dispenser
✔ If these symptoms match, the water filter is the most likely failed component in the system.
✔ In most cases, replacing the ULTRAWFC filter restores full water quality and flow immediately.
📦 Part Details
- Part Number: ULTRAWFC
- Type: Internal Refrigerator Water Filter — twist-in cartridge
- Replaces: 241791601, 242294401, 242294403, 9999, ULTRAWF
- Brands: Frigidaire, Electrolux
Check your water supply line and inlet valve screen for sediment buildup — a partially blocked inlet valve can cause low flow even after a new filter is installed. If flow is still slow after replacement, the inlet valve may need service.
⚙️ Installation
Skill Level: EASY — 5 minutes, no tools required. Disconnect power before servicing if accessing internal components. To replace: locate the filter housing in the upper-right interior of the fridge, twist the old filter counterclockwise to remove, insert the new ULTRAWFC and twist clockwise until locked. Run 2–3 gallons of water through the dispenser to flush the new filter before use.
✓ Compatible Models
Confirmed compatible with FGSS2335TF9, FGSS2335TFA plus additional Frigidaire and Electrolux models using the ULTRAWF filter family. Contact us to verify your model number before ordering.
💡 Pro Tip
Most Frigidaire filter indicators are time-based, not flow-based — meaning the light can stay off even when the filter is saturated. Set a calendar reminder every 6 months regardless of the indicator. Pair with a water inlet valve inspection annually to keep your dispenser running at full pressure.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
