Range Drip Bowls Burnt, Warped, or Missing? Drip Bowl Set W10288051 – Restore Your Cooktop Fast

If your Whirlpool or Maytag coil-element range has burnt, warped, or heavily soiled drip bowls that can’t be cleaned, replacing the full set is the fastest way to restore performance and appearance. In most Whirlpool and Maytag coil-element cooktops, the drip bowls sit beneath each burner element to catch spills, reflect heat upward, and protect the cooktop cavity from grease and debris. When they degrade, heat distribution becomes uneven, spills bake onto damaged surfaces and become impossible to clean, and the risk of grease ignition increases. ⚡ Common wear item on Whirlpool and Maytag coil-element ranges — typically replaced every few years with regular use. Part W10288051 is the genuine OEM 4-piece black drip bowl set that restores proper heat reflection, protects the cooktop cavity, and gives your range a clean, factory-fresh appearance.

❓ Is This the Right Part?

This is the correct set if ALL of the following are true:

• ✔ Your range has coil (plug-in) burner elements, not a smooth glass-ceramic cooktop
• ✔ Your existing drip bowls are black (not chrome/silver)
• ✔ Your burner elements and controls all function correctly — only the bowls are worn or damaged
• ✔ Your current bowls match these dimensions: small 7½” rim / 6¼” lip; large 9½” rim / 8¼” lip

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Drip bowls are heavily discoloured, burnt, or warped and won’t clean up
• Uneven cooking or hot spots on burners due to poor heat reflection
• Grease and spill residue baking onto damaged bowl surfaces after every use
• Visible rust, pitting, or surface breakdown on existing drip bowls

✔ If these symptoms match, a full drip bowl replacement is the correct and most cost-effective fix.

✔ In most cases, installing this set immediately restores heat efficiency and makes the cooktop easy to clean again.

📦 Part Details

• Part Number: W10288051
• Type: Drip Bowl Set — Black, 4-piece (2 small + 2 large), for coil-element cooktops
• Replaces: 4396070, 4396072
• Brands: Whirlpool, Maytag, Amana, Roper
• Small Bowl Dimensions: Pan 7½” rim edge-to-edge / 6¼” inside lip-to-lip; Bowl 5½” edge-to-edge, 2” deep
• Large Bowl Dimensions: Pan 9½” rim edge-to-edge / 8¼” inside lip-to-lip; Bowl 7½” edge-to-edge

⚙️ Installation

Skill Level: EASY — 5–10 minutes, no tools required. Disconnect power before servicing. Lift each coil burner element slightly and pull it straight out of the terminal block to unplug it. Lift out the old drip bowl and set it aside. Drop the new W10288051 bowl into position, re-seat the burner element into the terminal block, and press firmly until it clicks into place. Repeat for all four burners. Restore power and verify all elements heat normally.

✓ Compatible Models

Confirmed compatible with Whirlpool and Maytag coil-element range models including RF114PXSQ0, RF196LXKQ0, RF263LXTQ0, RF265LXTS0, RF368LXKQ0, RF385PXGZ0, RF395LXEQ0, RF396LXEQ0, RF3020XGN0, GR399LXGB0, MGR5775QDW, MGR6875ADW and additional Whirlpool, Maytag, Amana, and Roper models. Contact us to verify your model number before ordering.

💡 Pro Tip

✓ Model-Specific Repair Pages