Whirlpool Dishwasher Thermal Cut Out Fuse Kit W10402110, Replaces W10195528

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• No lights or response at the control panel
• Dishwasher stops operating and remains unresponsive after a thermal event
• Open thermal fuse or visibly heat-damaged fuse wiring/connectors

Check Before Replacing

• Disconnect electrical power before accessing the console or fuse.
• Verify the dishwasher’s breaker or power supply is present before condemning the fuse.
• With power disconnected, inspect the fuse, terminals, and nearby wiring for discoloration, melting, loose connections, or arcing.
• If qualified to perform electrical testing, check the removed fuse for continuity with a multimeter; an open reading indicates a failed fuse, but does not establish the cause of the overheating.
• If the fuse has opened, inspect related wiring and control-board areas for heat damage before installing the replacement. Do not bypass the fuse.

Pro Tip

Part Details

Installation Notes

• Disconnect power before servicing and observe static precautions around the control board.
• Access the control board and fuse through the dishwasher inner-door console as described in the Whirlpool instruction sheet.
• Install the new fuse with its supplied wiring; connect the specified lead to CON2 terminal P8 and the other lead to the door switch.
• Remove the specified old wire from the harness and secure the replacement wires to the main harness with the supplied wire tie.
• Reassemble the console and restore power only after all parts and panels are correctly installed.
• Never bypass or disable the thermal fuse.

Verified Compatible Models

66513962K013, ADB1400AWB1, ADB1400AWB2, ADB1400AWB3, ADB1400AWD1, ADB1400AWD2, ADB1400AWD3, ADB1400AWQ1, ADB1400AWQ2, ADB1400AWS1, ADB1400AWS2, ADB1400AWS3, ADB1400AWW1, ADB1400AWW2, ADB1400AWW3

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.