Whirlpool Washer Suspension Rod Kit - Set of 4 W10440786, Replaces W10440739, W10368626, W10368627

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer vibrates or walks during spin
• Repeated unbalanced-load or spinning interruptions
• Tub appears tilted or off-center at rest
• Banging or knocking caused by the tub contacting the cabinet

Check Before Replacing

• Disconnect power before inspection.
• With the washer empty and power disconnected, visually inspect all four suspension rods, suspension balls, bushings, and supports for bending, cracking, separation, or abnormal wear.
• Observe whether the empty tub hangs noticeably off-center or remains tilted instead of returning near center.
• Confirm the washer is level and test with a properly distributed load before attributing the symptom to the suspension kit.
• If symptoms persist after load distribution and leveling checks, have the washer diagnosed because other components can also cause unbalanced-spin symptoms.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before beginning installation.
• Wear protective work gloves and follow the model-specific service or installation instructions.
• Replace and seat the suspension components in their original locations; verify that each rod and its associated support is fully engaged before reassembly.
• After installation, confirm the tub is centered and moves freely without contacting the cabinet before operating the washer.
• Because installation requires access to the washer cabinet and suspension assembly, use a qualified technician if the model-specific procedure is unavailable or access is unsafe.

Verified Compatible Models

7MMVWB950AG0, 7MWTW8800AW0, MVWB750YW0, MVWB850YG0, MVWB850YG1, MVWB850YW0, MVWB850YW1, MVWB880BW0, MVWB950YG0, MVWB950YG1, MVWB950YW0, MVWB950YW1, MVWB980BG0, MVWB980BW0, WTW8200YW0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.