Whirlpool Corporation Washer electronic control board; control unit assembly, machine and motor W10480177, Replaces W10435609, W10445363

Genuine Whirlpool OEM electronic control board used to manage washer functions including filling, washing, draining, spinning, and motor operation.

Is This the Right Part?

Common Symptoms

• Washer will not start or cycle controls do not respond
• Washer does not fill, drain, agitate, or spin as commanded
• Cycles stop, fail to advance, or operate erratically
• Washer may show control-related or lid-lock-related fault symptoms
• Visible burn marks or a burning odor may indicate board damage

Check Before Replacing

• Verify the washer has power at the outlet and that the appliance cord and household breaker are functional.
• With power disconnected, inspect the control board and its connectors for visible burn marks, moisture intrusion, corrosion, loose connections, or damaged wiring.
• Confirm that the washer’s model and the number printed on the existing board match the required application before condemning the control board.
• Use the washer’s documented service or diagnostic procedure to check stored fault codes and perform available control-panel or component checks; do not replace the board based on a symptom alone.
• If the board is visibly burned or damaged, discontinue operation and replace it only after checking for an underlying wiring or component fault.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM main electronic control board
• Controls multiple washer functions from the console
• Part number W10480177
• Replaces Whirlpool numbers W10435609 and W10445363
• Listed for select Whirlpool top-load washer applications

Installation Notes

• Disconnect electrical power before servicing.
• Record wire locations before disconnecting the old board, then reconnect each harness to the corresponding location on the replacement.
• Secure the replacement board in the original panel mounting position and ensure wiring is retained away from moving or pinching points.
• After reassembly, restore power and perform the applicable washer calibration or service procedure before normal use.
• Verify the complete appliance model and original board number before installation; visually similar boards may not be interchangeable.

Verified Compatible Models

WTW4800XQ2, WTW4800XQ4

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.