DOOR DOES NOT SEAL PROPERLY
Whirlpool Refrigerator door gasket / Gasket-FIP W10800809, Replaces W10764833, Fixes Door does not seal properly
Genuine OEM gray refrigerator door gasket, identified by Whirlpool as Gasket-FIP. It provides the sealing function for the refrigerator door/FIP compartment.
Part W10800809Replaces W10764833Whirlpool
Genuine OEM gray refrigerator door gasket, identified by Whirlpool as Gasket-FIP. It provides the sealing function for the refrigerator door/FIP compartment.
Is This the Right Part?
Part NumberW10800809
ReplacesW10764833
ManufacturerWhirlpool
Appliance TypeRefrigerator
Part TypeRefrigerator door gasket / Gasket-FIP
✅ Cross Reference Information
Current Part NumberW10800809
ReplacesW10764833
Common Symptoms
- Frost or excess moisture may develop near the compartment.
- Refrigerator temperature may fluctuate when the seal is compromised.
- The door may not close or remain closed correctly.
- A dirty, deformed, torn, or compressed gasket may create visible gaps around the door perimeter.
Check Before Replacing
- Visually inspect the entire gasket perimeter for tears, deformation, compression, or sections pulled out of position.
- With the door closed, inspect for visible gaps or areas where the gasket is not contacting the cabinet.
- Clean the gasket and mating cabinet surface with a soft cloth and mild detergent solution, then recheck the seal.
- Check that shelves, bins, or food packages are not preventing the door from closing fully.
- Confirm that the refrigerator is reasonably level before attributing a sealing problem to the gasket.
Pro Tip
Clean the gasket and the cabinet contact surface regularly; food particles and other debris can create resistance and prevent proper sealing.
Part Details
Part NumberW10800809
Part TypeRefrigerator door gasket / Gasket-FIP
ManufacturerWhirlpool
Appliance TypeRefrigerator
Primary FunctionSeals the refrigerator door/FIP compartment to help retain cold air and limit moisture exchange.
Cross ReferencesW10764833
Key Features
- Genuine Whirlpool OEM part.
- Gray refrigerator door gasket identified by Whirlpool as Gasket-FIP.
- Designed as a gasket assembly for the refrigerator door/FIP compartment.
- Provides an airtight sealing interface intended to reduce cold-air and moisture loss.
Installation Notes
- Verify the appliance model and gasket orientation before installation.
- Use the model-specific owner or service instructions because installation access and retention details can vary by refrigerator model.
- Inspect the gasket-retaining area for debris or damage before fitting the replacement.
- After installation, close the door and check the complete perimeter for uniform contact and visible gaps.
- Do not operate the refrigerator with panels or components removed; obtain service assistance if the door or gasket-retention structure is damaged.
Verified Compatible Models
JBSFS42NMX25, JBSS42E22L01, JS42NXFXDE00, JS42NXFXDE01, JS42PPDUDE00, JS42PPDUDE01, JS42SSDUDE00, JS42SSDUDE01
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
