Whirlpool Refrigerator French-door gasket, gray W10830055, Replaces W10443238

Genuine Whirlpool gray refrigerator door gasket used on French-door refrigerator configurations. Depending on the specific refrigerator model, it may be used on the right door or on both fresh-food doors; model-number verification is required.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Visible tears, cracks, stiffness, deformation, or loose sections in the gray gasket
• Door does not close or seal evenly
• Cold air leakage or localized condensation near the door seal
• Refrigerator runs more often than usual while maintaining temperature

Check Before Replacing

• Visually inspect the entire gasket perimeter for tears, gaps, distortion, stiffness, or sections pulled out of the door channel.
• With the door closed, perform a paper test at multiple points around the seal; light resistance is expected, while paper pulling out freely may indicate poor sealing.
• Check that the gasket is fully seated in its channel, especially at all four corners and near the center meeting area of French doors.
• Confirm that food packages, shelves, or door alignment are not preventing the door from closing before condemning the gasket.

Pro Tip

Part Details

Key Features

• Whirlpool genuine/OEM refrigerator door gasket
• Gray flexible rubber seal
• Designed for French-door refrigerator configurations
• Magnetic sealing element helps close the air gap when the door is shut
• Depending on the refrigerator model, may serve the right door or both fresh-food doors; model verification remains necessary

Installation Notes

• Follow the refrigerator model’s service or owner documentation before beginning and protect perishable food while the door is open.
• Let the replacement gasket relax and straighten at room temperature; warm water or gentle low heat may be used cautiously to remove shipping folds.
• Remove the old gasket according to the model-specific retention method, then seat the replacement beginning at the corners and press it evenly into the door channel.
• Inspect for wrinkles, gaps, or pinching—particularly around the hinge side and the center meeting area—before returning the refrigerator to normal operation.
• Do not use excessive heat, force, or unverified adhesive; confirm the gasket is fully seated and the door closes normally.

Verified Compatible Models

AFI2539ERM02, AFI2539ERM03, IX7DDEXGZ000, IX7DDEXGZ001, IX7DDEXGZ002, IX7DDEXGZ003, MFI2269DRE00, MFI2269DRE01, MFI2269DRH00, MFI2269DRH01, MFI2269DRM00, MFI2269DRM01, MFI2269FRE00, MFI2269FRE01, MFI2269FRH00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.