Whirlpool Corporation Range Valve and Pressure Regulator Assembly W10861656, Replaces W10554066

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Bake or broil burner may not ignite or may produce weak flames when other gas-supply conditions are normal.
• Oven heating may be inconsistent because gas flow or pressure is not maintained steadily.
• Multiple burners may show weak or uneven flames if the regulator is not supplying stable pressure.

Check Before Replacing

• Confirm that the range model and fuel type match the part application before replacing the assembly.
• With the appliance turned off and cool, observe whether weak or unstable flames affect more than one burner; this can indicate a supply or regulation issue but does not confirm regulator failure.
• Check the owner’s manual or rating label for the specified gas type and verify that the installed conversion/orifice configuration is appropriate.
• Visually inspect accessible gas connections and the regulator area for obvious damage or looseness without disassembling the gas system. If gas is smelled, shut off the gas supply if safe to do so and contact a qualified technician.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the range’s gas supply before servicing.
• Use the appliance’s parts diagram and service documentation to confirm connection locations and assembly orientation.
• Wear work gloves when handling the assembly.
• Because this is a gas-system component, have installation and post-installation leak and operation checks performed by a qualified gas-appliance technician.

Verified Compatible Models

66475123610, JGS1450FP0, JGS1450FS1, JGS1450ML0, KSGG700EBS2, WEG745H0FE0, WEG745H0FH0, WEG745H0FS0, WEG750H0HV0, WEG750H0HV1, WEG750H0HW1, WEG750H0HZ0, WEGA25H0HZ5

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.