WASHER ROCKS OR VIBRATES BECAUSE THE LEVELING LEG IS DAMAGED, MISSING, LOOSE, OR INCORRECTLY ADJUSTED
Whirlpool Washer Leveling Leg W10888529, Fixes Washer rocks or vibrates because the leveling leg is damaged, missing, loose, or incorrectly adjusted
Genuine OEM leveling leg that supports the washer and allows height adjustment to level the appliance.
Part W10888529Replaces W10073890Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberW10888529
ReplacesW10073890
ManufacturerWhirlpool
Appliance TypeWasher
Part TypeWasher Leveling Leg
✅ Cross Reference Information
Current Part NumberW10888529
Verified Previous OEM NumbersW10073890
Common Symptoms
- Washer cabinet rocks when pressed
- Excessive vibration or shaking during operation
- Washer walks or moves on the floor
- Appliance remains off-level after adjustment
- Cracked, worn, or missing leveling foot
Check Before Replacing
- Disconnect power before inspecting or adjusting the leg.
- With the washer empty and stationary, check whether the cabinet rocks on the floor.
- Place a level on the washer and check side-to-side and front-to-back levelness.
- Visually inspect W10888529 for cracking, wear, looseness, or missing components.
- Confirm that the other three leveling legs also contact the floor and are not damaged.
- Adjust the leg height in small increments, then recheck levelness and stability; do not assume the leg is the only cause of vibration.
Pro Tip
Check and adjust all four leveling legs, then ensure the legs remain secured against the washer base so they do not loosen during operation.
Part Details
Part NumberW10888529
Part TypeWasher Leveling Leg
ManufacturerWhirlpool
Appliance TypeWasher
Primary FunctionSupports the washer and provides threaded height adjustment so the appliance can sit level and stable.
Installation Notes
- Disconnect electrical power before installation or adjustment.
- Use appropriate assistance when tilting or supporting the washer; avoid allowing the appliance to tip unexpectedly.
- Install the replacement leg in the same designated leg position and adjust it until the washer is stable and level.
- Recheck levelness and cabinet stability after installation before returning the washer to normal use.
- Follow the appliance model’s installation instructions for the exact adjustment and securing procedure.
Verified Compatible Models
Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
