Whirlpool Washer / Washer Dryer Combo Water Inlet Valve W10906602, Replaces W10869511, W11176412

Genuine Whirlpool water inlet valve that controls water flow into the washer.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer does not fill with water
• Washer fills slowly
• Washer continues filling when it should stop
• Water enters the washer when it is not running
• Water leaks from the inlet-valve area

Check Before Replacing

• Confirm both household water supplies are turned on and that the inlet hoses are not kinked.
• Inspect the hose connection screens for visible sediment or debris; clean only as permitted by the appliance service instructions.
• Check whether the washer receives water during the fill portion of a cycle and whether the problem affects one or both water-temperature selections.
• Before any inspection or installation, unplug the washer and shut off the water supply.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM water inlet valve.
• Regulates water flow into the washer.
• Requires adequate incoming water pressure to operate correctly.
• Includes inlet connection screens that can become restricted by sediment or debris.

Installation Notes

• Unplug the washer before servicing.
• Shut off the water supply before disconnecting the inlet hoses.
• Wear work gloves during service to protect hands from cabinet edges and components.
• Verify hose and electrical connections are secure and check for leaks after service, following the appliance-specific service instructions.

Verified Compatible Models

11044422510, 11044422610, 11044432810, 11081442710, 11081452710, NTC3500FW0, WET4024HW0, WET4124HW0, WTW2000HW0, YWET4024HW0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.