Whirlpool Washer Drain pump W10906604, Replaces W10882103, W11176426

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Standing water remains in the tub after the cycle.
• Drain time is unusually long or the cycle does not complete normally.
• Grinding, knocking, or humming may occur during drain.
• Water may leak near the pump or connected hoses.

Check Before Replacing

• Disconnect power before inspecting the pump, wiring, hoses, or filter.
• Check the drain hose and pump/filter area for kinks, lint, coins, or other obstructions.
• Visually inspect the pump electrical connector and hose connections for looseness, damage, or leaks.
• During a drain cycle, observe whether the pump runs and whether water moves through the drain hose; these observations do not by themselves prove pump failure.
• If the hose and pump area are clear but draining remains abnormal, use the appliance model's service diagnostics or contact a qualified technician.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing and follow the safety instructions for the specific washer model.
• Remove remaining water from the washer before disconnecting pump hoses to reduce spill risk.
• Photograph or label hose and electrical connections before removal so they can be returned to their original positions.
• Inspect connected hoses and the pump/filter area for debris while the pump is accessible.
• Use the model-specific service or repair instructions for access, mounting, and post-installation testing; installation details vary by washer model.

Verified Compatible Models

11044422510, 11044422610, 11044432810, 11081442710, 11081452710, NTC3500FW0, WET4024HW0, WET4124HW0, WTW2000HW0, YWET4024HW0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.