Whirlpool Dishwasher User Control and Display Board / Control Panel, Stainless W10910626, Replaces W10839474

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher buttons do not respond
• Start button does not register input
• Display is blank, flickering, or shows unreadable characters
• Control-panel lights flash or operate erratically
• Dishwasher may stop responding to cycle selections

Check Before Replacing

• Confirm the dishwasher has power and that the door is fully closed before attributing the issue to the control panel.
• Check whether the problem affects specific buttons, the display, or the entire user interface.
• With power disconnected, inspect the control-panel wiring and connectors for loose connections, corrosion, or visibly damaged pins.
• If the dishwasher runs while the panel remains unlit, inspect the user-interface connection and harness before replacing the panel; a separate control board or wiring fault can produce similar symptoms.
• Verify the exact dishwasher model and finish before ordering, because control panels are model- and color-specific.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing the control panel and shut off the dishwasher water supply.
• Wear work gloves when handling the door and panel assembly.
• Remove the dishwasher door's inner access panel as required to reach the control-panel assembly.
• Disconnect the panel wiring carefully, install the replacement in the same position, reconnect the wiring, and secure the panel using the original hardware.
• Restore power only after the panel and wiring are secured, then verify button and display operation.

Verified Compatible Models

MDB8959SFE1, MDB8959SFE3, MDB8959SFE4, MDB8959SFH1, MDB8959SFH3, MDB8959SFH4, MDB8959SFZ1, MDB8959SFZ2, MDB8959SFZ3, MDB8959SFZ4

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.