Whirlpool Refrigerator Evaporator Fan Motor W11033168, Replaces W10799425, W10753788

Genuine Whirlpool refrigerator evaporator fan motor assembly with wire harness and thermistors; it circulates air through the refrigerator/freezer cooling system.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Evaporator fan does not run
• Unusual buzzing, grinding, or rattling from the evaporator area
• Uneven cooling between compartments
• Reduced airflow from refrigerator vents
• Frost or ice buildup around the evaporator fan that restricts the blade

Check Before Replacing

• Disconnect refrigerator power before accessing or touching the evaporator fan assembly.
• With power disconnected, visually check whether ice or debris is obstructing the fan blade.
• With power disconnected, gently check whether the fan blade turns freely without rubbing or binding.
• Listen for abnormal fan noise during normal operation, without placing hands near a running fan.
• Inspect the assembly’s wire harness, thermistor leads, connectors, and mounting points for visible damage or loose connections.
• If the refrigerator model provides a service-diagnostic fan test, use the model-specific technical sheet and follow its safety instructions; do not assume a fan fault from symptoms alone.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM evaporator fan motor assembly
• Includes wire harness and thermistors
• Designed for Whirlpool-family refrigerators
• Replaces archived Whirlpool part numbers W10799425 and W10753788

Installation Notes

• Disconnect electrical power before service and protect perishable food if the refrigerator will be open or without cooling.
• Access the evaporator fan area according to the refrigerator’s model-specific service information; exact access differs by model.
• Photograph or label harness routing and connector locations before disconnecting the old assembly.
• Replace the assembly without bending or damaging nearby evaporator tubing, wiring, or thermistor leads.
• Position the thermistors as they were originally installed and ensure the harness cannot contact the fan blade.
• Restore all covers and airflow components before reconnecting power, then verify that the fan operates normally.

Verified Compatible Models

KRFF507EBL01, KRFF507ESS01, KRFF507EWH01, KRFF707EBS00, KRFF707ESS01, MFT2776DEE02, MFT2776DEH02, MFT2776DEM01, MFT2776DEM02, MFT2776FEZ00, MFT2776FEZ01, MFT2778EEZ01, WRF757SDEE01, WRF757SDEH01, WRF757SDEM01, WRF767SDEM00, WRF767SDEM01, WRF997SDDM02

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.