Whirlpool Refrigerator water inlet valve W11043013, Replaces W10913947

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Slow or partial ice-maker filling
• Weak or inconsistent dispenser flow
• Water leaking into the ice maker or dispenser when not activated
• Ice maker overflowing because the valve does not shut off fully
• Water leakage around the valve housing

Check Before Replacing

• Confirm the refrigerator’s household water supply is turned on and the supply tubing is not kinked.
• Inspect the refrigerator water filter and filter connections for blockage or leakage before condemning the valve.
• Check for visible cracks or water leakage around the valve and its tubing connections.
• Verify that water pressure is adequate; RepairClinic identifies at least 20 psi as necessary for the valve to shut off properly.
• With power disconnected, inspect the valve wiring connectors and terminals for looseness, corrosion, or damage.
• If electrical testing is required, use the appliance’s service procedure or a qualified technician; do not perform live-voltage testing unless properly trained.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the refrigerator’s water supply before service.
• The valve is located at the rear panel of the refrigerator section on documented applications.
• Photograph or label tubing and electrical connections before transferring them to the replacement valve.
• After installation, restore the water supply gradually and inspect every connection for leaks.
• Confirm water dispensing and ice-maker filling operation after installation.

Verified Compatible Models

AFI2539ERB02, AFI2539ERM03, AFI2539ERW02, IX7DDEXGZ001, IX7DDEXGZ002, IX7DDEXGZ003, MFI2570FEB01, MFI2570FEB02, MFI2570FEB03, MFI2570FEB04, MFI2570FEW01, MFI2570FEW02, MFI2570FEW03, MFI2570FEW04, MFI2570FEZ03

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.