Whirlpool Dishwasher Circulation Pump Filter W11084156, Replaces W10713298

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishes are not cleaned properly.
• Weak or absent spray action during the wash cycle due to reduced circulation.
• Grinding, clicking, or humming may occur if a damaged filter obstructs the circulation pump.
• A damaged or improperly reseated filter area may contribute to water leakage.

Check Before Replacing

• With the dishwasher disconnected from electrical power, inspect the circulation-pump filter for food debris, clogging, shredding, cracking, or other visible damage.
• Check whether the filter restricts the pump inlet or appears tangled with moving pump components; do not operate the pump while inspecting it.
• If wash performance is poor, verify that the dishwasher fills with water and that spray arms are unobstructed before attributing the problem to this filter.
• After service, inspect the pump/filter area for visible leaks during a brief supervised test, if the model’s service instructions permit testing.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the dishwasher water supply before accessing the circulation-pump assembly.
• Access and replacement location vary by dishwasher model; follow the appliance-specific service or repair instructions.
• When reinstalling, ensure the filter and its sealing surfaces are fully seated and that any pump-support or seal components are returned to their original positions.
• Reconnect all components securely, then check for leaks and proper water circulation before returning the dishwasher to normal use.

Verified Compatible Models

665.14813N611, KDPM354GBS0, KDTM354DSS5, KDTM354ESS1, KDTM384EBS0, KDTM404EBL2, KDTM404EBS0, KDTM404EBS2, KDTM404ESS3, KDTM504EPA1, KDTM704EBS1, KDTM704ESS1, KDTM804EBS0, KDTM804EBS1, KDTM804EBS2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.