DISHWASHER LEAKING FROM THE DRAIN-HOSE AREA
Whirlpool Dishwasher drain hose W11084165, Fixes Dishwasher leaking from the drain-hose area
Genuine Whirlpool dishwasher drain hose. The hose carries wastewater from the dishwasher pump to the household drain; some listings describe the assembly as including a check valve.
Part W11084165Replaces W10651070Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberW11084165
ReplacesW10651070
ManufacturerWhirlpool
Appliance TypeDishwasher
Part TypeDishwasher drain hose
✅ Cross Reference Information
Current Part NumberW11084165
ReplacesW10651070
Common Symptoms
- Water remains in the dishwasher after a cycle when the hose is clogged or restricted.
- Slow or incomplete draining caused by a kinked, clogged, cracked, or damaged hose.
- Water leaks beneath or behind the dishwasher from a failed hose or connection.
- Wastewater can flow back into the tub if the check-valve function or drain-loop arrangement is compromised.
Check Before Replacing
- With the dishwasher de-energized, visually inspect the accessible hose and connections for cracks, kinks, abrasion, loose connections, or moisture.
- Check the hose routing for low points or sharp bends that could restrict flow; confirm the drain loop is routed according to the dishwasher's installation instructions.
- Inspect the sink, disposer, or air-gap connection for blockage before attributing a draining problem to the hose.
- If safe access is available, check the hose connection area for accumulated debris or signs of leakage; do not run the appliance with an active leak.
- Do not seal the drain hose connection in a way that prevents the required air gap or high-loop arrangement.
Pro Tip
A drain-hose complaint can be installation-related: verify the high loop or required air-gap arrangement and inspect the disposer or sink connection before replacing the hose.
Part Details
Part NumberW11084165
Part TypeDishwasher drain hose
ManufacturerWhirlpool
Appliance TypeDishwasher
Primary FunctionCarries wastewater from the dishwasher pump to the household drain; the assembly may include a check valve that helps prevent wastewater from flowing back into the tub.
Installation Notes
- Disconnect electrical power to the dishwasher and shut off the water supply before installation.
- Follow the appliance-specific service or installation instructions for hose routing and connection points.
- Secure the drain hose to prevent it from moving, leaking, or pulling out of the drain connection.
- Maintain the required high loop or air-gap arrangement; do not create a sealed drain connection that can promote siphoning or backflow.
- After installation, check the hose and connections for leaks before returning the dishwasher to normal use.
Verified Compatible Models
665.14763N510, KDPM354GPS0, KDTM354ESS2, KDTM384ESS0, KDTM404EBL2, KDTM404EWH1, KDTM504EPA0, KDTM504EPA1, KDTM704EBS1, KDTM704EBS2, KDTM704ESS1, KDTM704ESS3, KDTM804EBS0, KDTM804ESS0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
