Whirlpool Dishwasher electronic control board W11087227, Replaces W10919361

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Unresponsive or erratic cycle operation
• Cycle stops before completing
• Dishwasher fails to initiate washing, draining, or drying functions
• Heater activation or water-temperature control is absent
• Control-related error indications or abnormal cycle timing

Check Before Replacing

• Confirm the dishwasher has power and that the circuit breaker or fuse has not tripped.
• Verify that the door closes and the latch engages fully.
• Perform the model-approved power reset before condemning the control board.
• Check for obvious loose, damaged, or heat-affected wiring at accessible harness connections, with power disconnected.
• Use the appliance’s service documentation to distinguish a control-board fault from a failed latch, thermal protection device, pump, valve, heater, or wiring fault.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power to the dishwasher before installation.
• Wear protective work gloves while handling the part and inner-door components.
• Transfer wiring connections carefully and ensure each harness is fully seated before reassembly.
• Because this is an electrical control component, installation should be performed by a qualified technician if the required service procedure or electrical testing is unfamiliar.
• After installation, restore power and verify operation using the appliance’s applicable test or service procedure.

Verified Compatible Models

WDP370PAHB0, WDP370PAHB1, WDP370PAHB2, WDP370PAHW0, WDP370PAHW1, WDP370PAHW2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.