Whirlpool Corporation Range Vent Hood Vent Fan Motor / Range Hood Blower Assembly W11106377, Replaces W10294501, W10638161, WPW10294501

Genuine Whirlpool OEM vent fan motor/blower assembly used in select Whirlpool, KitchenAid, and JennAir range hoods. The assembly removes cooking grease, smoke, odors, and other airborne contaminants from the kitchen.

Is This the Right Part?

Common Symptoms

• Blower does not start
• Weak or reduced airflow
• Loud or abnormal blower noise
• Motor hums without turning
• Blower shuts off unexpectedly

Check Before Replacing

• Confirm the range hood has power by checking its controls and, if appropriate, the circuit breaker; do not work on the hood while energized.
• Check that the blower connector and accessible wiring are seated and undamaged, using the appliance’s service documentation for access guidance.
• Inspect the grease filters, blower opening, and accessible duct path for heavy buildup or blockage that could restrict airflow or create noise.
• With power off, check whether the blower wheel turns freely by hand without forcing it; binding or obstruction may indicate a mechanical problem, but does not by itself prove the motor is defective.
• If the motor hums, compare the symptom with possible obstructions, loose blower components, or control/power issues before replacing the assembly.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM vent fan motor/blower assembly
• Designed for select Whirlpool, KitchenAid, and JennAir range hoods
• Supplied as a blower assembly rather than only a bare motor
• Replaces archived Whirlpool numbers W10294501, W10638161, and WPW10294501

Installation Notes

• Disconnect electrical power to the range hood at the plug or circuit breaker before beginning work.
• Wear work gloves when handling the hood and blower assembly.
• Use the appliance-specific parts diagram or service documentation to identify the blower assembly, connectors, and mounting arrangement before removal.
• Transfer or reconnect wiring only as shown by the appliance documentation; do not force connectors or modify the wiring.
• After installation, restore power and verify blower operation at each applicable speed while checking for abnormal vibration or noise.

Verified Compatible Models

JXP5032WS, JXP5032WS0, JXP5032WW, JXP5032WW0, JXW8030WS2, JXW8036WS2, KVIB602DSS0, KVIB602DSS1, KVIB602DSS3, KVIB606DBS0, KVIB606DSS0, KVWB600DSS4, KVWB606DSS4, KXW4330YSS3, KXW4336YSS3

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.