RANGE-HOOD BLOWER DOES NOT OPERATE OR HAS WEAK AIRFLOW
Whirlpool Corporation Range Vent Hood Vent Fan Motor / Range Hood Blower Assembly W11106377, Fixes Range-hood blower does not operate or has weak airflow
Genuine Whirlpool OEM vent fan motor/blower assembly used in select Whirlpool, KitchenAid, and JennAir range hoods. The assembly removes cooking grease, smoke, odors, and other airborne contaminants from the kitchen.
Part W11106377Replaces W10294501, W10638161, WPW10294501Whirlpool Corporation
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberW11106377
ReplacesW10294501, W10638161, WPW10294501
ManufacturerWhirlpool Corporation
Appliance TypeRange Vent Hood
Part TypeVent Fan Motor / Range Hood Blower Assembly
✅ Cross Reference Information
Current Part NumberW11106377
ReplacesW10294501, W10638161, WPW10294501
Common Symptoms
- Blower does not start
- Weak or reduced airflow
- Loud or abnormal blower noise
- Motor hums without turning
- Blower shuts off unexpectedly
Check Before Replacing
- Confirm the range hood has power by checking its controls and, if appropriate, the circuit breaker; do not work on the hood while energized.
- Check that the blower connector and accessible wiring are seated and undamaged, using the appliance’s service documentation for access guidance.
- Inspect the grease filters, blower opening, and accessible duct path for heavy buildup or blockage that could restrict airflow or create noise.
- With power off, check whether the blower wheel turns freely by hand without forcing it; binding or obstruction may indicate a mechanical problem, but does not by itself prove the motor is defective.
- If the motor hums, compare the symptom with possible obstructions, loose blower components, or control/power issues before replacing the assembly.
Pro Tip
A noisy or nonworking blower is not always caused by the motor: grease or debris buildup, a blocked vent, loose blower hardware, or a power/control problem can produce similar symptoms. Verify those conditions first.
Part Details
Part NumberW11106377
Part TypeVent Fan Motor / Range Hood Blower Assembly
ManufacturerWhirlpool Corporation
Appliance TypeRange Vent Hood
Primary FunctionDrives the range-hood blower to circulate and exhaust cooking smoke, grease, odors, and other airborne contaminants.
Installation Notes
- Disconnect electrical power to the range hood at the plug or circuit breaker before beginning work.
- Wear work gloves when handling the hood and blower assembly.
- Use the appliance-specific parts diagram or service documentation to identify the blower assembly, connectors, and mounting arrangement before removal.
- Transfer or reconnect wiring only as shown by the appliance documentation; do not force connectors or modify the wiring.
- After installation, restore power and verify blower operation at each applicable speed while checking for abnormal vibration or noise.
Verified Compatible Models
JXP5032WS, JXP5032WS0, JXP5032WW, JXP5032WW0, JXW8030WS2, JXW8036WS2, KVIB602DSS0, KVIB602DSS1, KVIB602DSS3, KVIB606DBS0, KVIB606DSS0, KVWB600DSS4, KVWB606DSS4, KXW4330YSS3, KXW4336YSS3
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
