Whirlpool Washer Suspension Rod Kit W11130362, Replaces W11228718, W11033491, W10901056, W11027174, W10821710, W10748956, W10780040, W10594080, W10735786

Genuine Whirlpool OEM suspension rod kit for top-load washing machines. The kit supports the inner tub, reduces vibration and movement, and helps address shaking, spinning issues, banging, and knocking. It includes four suspension rods with springs and suspension ball cups.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer vibrates or walks across the floor during spin
• Banging, knocking, or thumping caused by excessive tub movement
• Spin cycle problems associated with an unstable or off-balance tub
• Tub appears poorly centered after an unbalanced load

Check Before Replacing

• Disconnect power before inspecting the suspension system.
• With the washer empty and powered off, visually inspect the four suspension rods, springs, and suspension ball cups for visible bending, breakage, dislodgement, or abnormal wear.
• Check that the tub is centered and that each suspension rod is seated correctly in its support points; do not operate the washer if a rod or spring is visibly loose or damaged.
• Confirm the washer is level and test whether redistributing an unbalanced load changes the symptom before attributing the issue to the suspension kit.
• If excessive shaking remains after the load and leveling checks, compare the suspension components with the model-specific service information or consult a qualified technician.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM suspension rod kit
• Kit contains four suspension rods with springs and suspension ball cups
• Designed for compatible top-load washers
• Supports the inner tub and reduces vibration and movement
• Current Whirlpool OEM part number W11130362
• Whirlpool item number 4546230

Installation Notes

• Disconnect electrical power before beginning installation.
• Install the complete kit using the model-specific service or installation instructions; suspension layouts and access methods can vary by washer model.
• Ensure all four rods, springs, and suspension ball cups are fully seated and correctly aligned before reassembling the washer.
• After installation, verify that the tub is centered and moves normally by hand with the washer empty and powered off.
• Run the washer only after confirming that no suspension component is loose or contacting surrounding parts.

Verified Compatible Models

7MMVWC565FW0, 7MMVWC565FW1, 7MMVWX655EW0, 7MMVWX655EW1, 8TWTW5010PW0, 8TWTW5010PW1, 8TWTW6000JW1, 11022352510, 11022352511, 11022352512, 11025132410, 11025132412, CAW42114GW0, CAW42114GW1, CAW42114GW2, WTW5000DW1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.