OVEN DOES NOT HEAT NORMALLY BECAUSE THE BAKE BURNER IS DAMAGED, CORRODED, OR PRODUCING AN ABNORMAL FLAME
Whirlpool Range Oven burner (bake burner/burner tube) W11174122, Fixes Oven does not heat normally because the bake burner is damaged, corroded, or producing an abnormal flame
Genuine Whirlpool OEM bake burner/burner tube that provides the main bake flame and heat for a gas range oven.
Part W11174122Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberW11174122
ManufacturerWhirlpool
Appliance TypeRange
Part TypeOven burner (bake burner/burner tube)
✅ Cross Reference Information
Current Part NumberW11174122
Common Symptoms
- Oven temperature is inaccurate
- Oven bakes unevenly
- Weak or irregular bake flame
- Oven fails to heat when the bake cycle is selected
- Visible corrosion, deformation, or damage to the burner tube
Check Before Replacing
- With the gas supply shut off and the range disconnected from electrical power, visually inspect the bake burner for corrosion, deformation, blockage, or physical damage.
- If the burner can be observed during operation, compare its flame behavior with the appliance service instructions; do not attempt to adjust gas components.
- Confirm that the suspected component is the bake burner tube rather than the separate bake igniter or gas valve.
- Verify the appliance model and the part number before ordering or installing a replacement.
Pro Tip
A damaged or corroded bake burner can cause uneven heating even when the igniter operates; inspect the burner tube itself rather than assuming an ignition problem is caused by the igniter.
Part Details
Part NumberW11174122
Part TypeOven burner (bake burner/burner tube)
ManufacturerWhirlpool
Appliance TypeRange
Primary FunctionDelivers the main bake-gas flame inside a compatible gas range oven to heat the oven cavity for baking and roasting.
Installation Notes
- Shut off the gas supply and disconnect electrical power before servicing.
- Wear work gloves and follow the appliance-specific service or installation instructions.
- Ensure the replacement burner is seated correctly and that its fasteners and burner-to-gas connection are secure.
- After installation, follow the manufacturer’s procedure for testing the bake burner and checking gas connections for leaks; if qualified procedures are unavailable, use a trained appliance technician.
Verified Compatible Models
GGG388LXB04, IGS900DS01, GGG388LXQ03, GGG388LXQ01, IGS900DS05, GGG390LXB00, GGG388LXQ05, GGG390LXB02, GGG390LXQ02, GGG390LXB04, GGG390LXQ00, GGG390LXS01, GGG390LXQ04, GGG390LXS03, GGG390LXS05
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
