Whirlpool Corporation Washer Water Inlet Valve W11210459, Replaces W10701459, W10838319, W10869799, W11025984, W11038711

Genuine Whirlpool OEM water inlet valve that controls hot and cold water flow into a washing machine.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• No water enters the washer during a fill cycle
• Slow or restricted filling
• Filling with only hot or only cold water
• Water continues entering when the washer is off
• Washer overfills or shows a long-fill/no-fill condition
• Water leaking or trickling from the valve area

Check Before Replacing

• Confirm both household water supply valves are fully open.
• Inspect the external fill hoses for kinks, crushing, or restricted flow.
• Turn off water and inspect the valve inlet screens for sediment or mineral buildup; clean only as appropriate without damaging the screens.
• If water continues entering with the washer unplugged, shut off the household water supply; this behavior is consistent with a valve that is not closing, but does not by itself establish the complete diagnosis.
• Verify that the washer’s model-specific wiring and valve connections are intact before replacing the component.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM washer water inlet valve
• Dual hot-and-cold water inlet control
• Designed for selected Whirlpool-family top-load washers
• Valve assembly may incorporate a thermistor on applicable configurations

Installation Notes

• Disconnect electrical power and shut off the household water supply before service.
• Remove the external water hoses and access the valve through the washer’s model-specific access area.
• Transfer the wire harness and internal hose connections to the replacement valve in the same configuration; retain clamps and mounting hardware unless the model-specific procedure states otherwise.
• Reconnect the supply hoses, restore water and power, run a fill cycle, and inspect all connections for leaks.

Verified Compatible Models

110.20222510, 110.20222511, 110.20232710, 110.20232711, 110.20242510, 110.20242511, 110.20362810, 110.20362811, 110.22242510, 110.22242511, 110.22332510, 110.22332511, 110.22342511, 110.22342512, 110.22352510, WTW4915EW1, WTW5000DW1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.