Whirlpool Dishwasher Hose-drain W11250156, Replaces W11247324

Whirlpool OEM dishwasher drain hose.

Is This the Right Part?

Common Symptoms

• Residual water remains in the dishwasher after a cycle
• Slow or incomplete draining
• Water leakage at a hose connection or damaged section
• Drain-back or siphoning caused by improper hose routing or lack of a high loop

Check Before Replacing

• Disconnect electrical power before inspecting the hose and connections.
• Visually inspect the entire hose for kinks, crushing, cuts, bulges, abrasion, or wet areas.
• Confirm the hose is firmly attached at the dishwasher drain port and at the sink, disposer, or drain connection, with the connection clamp properly positioned.
• Check that the hose is routed smoothly and has the required high loop or equivalent anti-siphon routing for the specific dishwasher installation.
• If accessible without disassembly, check for an obvious blockage at the drain connection; do not probe or force objects through the hose.
• Run a brief drain or rinse operation only after confirming the hose connections are secure, and watch for leaks. Stop the appliance if leakage occurs.

Pro Tip

Part Details

Key Features

• Whirlpool OEM dishwasher drain hose
• Listed by Whirlpool as Hose-drain
• Exact OEM part number W11250156
• Replaces Whirlpool part number W11247324
• Used to convey dishwasher drain water to the household drain system

Installation Notes

• Disconnect power and shut off the water supply before service, following the dishwasher’s installation or service instructions.
• Attach the hose fully to the dishwasher drain port and secure the connection with the specified clamp or retaining method for the appliance.
• Route the hose toward the sink, disposer, or drain connection without sharp bends or kinks.
• Use the dishwasher installation instructions to establish the required high loop or other anti-siphon arrangement.
• After installation, run a short cycle or drain operation and inspect both ends of the hose for leakage.

Verified Compatible Models

UDT518SAHP0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.