Whirlpool Washer tub suspension spring W11266649, Replaces W10312146, W10365760, W10818964

Genuine Whirlpool OEM suspension spring that supports and stabilizes the washer outer tub during operation and unbalanced loads.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Excessive tub movement during spin
• Tub banging or striking the cabinet
• Washer becoming unbalanced more easily than usual
• Suspension-related noise during agitation or spin

Check Before Replacing

• Unplug the washer before inspection.
• Visually inspect the spring for stretching, breakage, detachment, or obvious deformation.
• With the washer empty and power disconnected, check whether the spring is properly attached at both ends and compare its position with the other suspension springs, if accessible.
• Confirm that the symptom is not caused by an overloaded or unevenly distributed load before attributing it to the spring.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM suspension spring
• Supports and stabilizes the washer outer tub
• Used in washer suspension systems
• Replaces Whirlpool manufacturer numbers W10312146, W10365760, and W10818964

Installation Notes

• Disconnect electrical power before servicing.
• Wear work gloves because the spring may be under tension and surrounding cabinet or tub components may have sharp edges.
• Install only after confirming that the replacement matches the appliance model and the removed spring’s attachment arrangement.
• Ensure the spring is fully seated at both attachment points before restoring power and operating the washer.

Verified Compatible Models

7MMHW5500FC0, 7MMHW5500FC1, 7MMHW5500FW0, 7MMHW5500FW1, 7MMHW6000BW0, 7MMHW7000BG0, 7MMHW7000YG0, 7MMHW7000YW0, 7MMHW7100DC0, 7MMHW7100DW0, MHW3000BG0, MHW3000BG1, MHW3000BG2, MHW3000BW0, MHW3000BW1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.