Whirlpool Refrigerator Water Inlet Valve W11312191, Replaces W11095287

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water dispenser does not dispense water
• Ice maker does not fill or produce ice
• Water leaks into the ice maker or refrigerator
• Ice maker overfills because the valve does not shut off fully
• Slow or restricted water flow when the supply pressure and tubing are adequate

Check Before Replacing

• Confirm the refrigerator’s water supply shutoff valve is fully open.
• Inspect the refrigerator water line for kinks, crushing, or visible blockage.
• Inspect the inlet screen or filter area for visible debris or mineral buildup without damaging or removing the screen.
• Check household water pressure; the valve requires adequate pressure to shut off properly, with RepairClinic specifying a minimum of 20 psi.
• If checking coil resistance, use the appliance service documentation or the rating marked on the valve; do not treat a resistance reading alone as definitive proof of failure.
• After any water-line inspection, check the valve and connections for leaks.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the refrigerator water supply before servicing.
• Remove the existing valve and transfer or reconnect the water and electrical connections only as shown in the appliance-specific service documentation.
• Secure the replacement valve in the original mounting location; do not alter tubing routing or connectors.
• Restore the water supply gradually and inspect all valve connections for leaks before returning the refrigerator to normal operation.
• Verify the replacement against the refrigerator model and the original valve connections before installation.

Verified Compatible Models

JFFCC72EFP00, JFFCC72EFP02, JFFCC72EFS00, JFFCC72EFS02, JFFCC72EFS03, JFFCC72EFS04, KRFC704FBS00, KRFC704FBS01, KRFC704FBS02, KRFC704FBS03, KRFC704FPS00, KRFC704FPS01, KRFC704FPS03, KRFC704FPS04, KRFC804GBS00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.