Whirlpool Range/Stove/Oven Burner knob W11380561, Replaces W10912166

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Cracked, chipped, broken, or missing knob.
• Knob does not reliably hold the selected setting.
• Knob positions do not correspond to actual burner settings.
• Control is difficult to adjust because the knob is damaged or does not properly engage the control shaft.

Check Before Replacing

• With all controls OFF and the appliance cool, inspect the knob for cracks, chips, deformation, or a damaged inner stem socket.
• Turn the knob through its normal range and check whether its indicator aligns with the panel markings and whether burner response corresponds to the selected position.
• Gently check whether the knob is fully seated on the control stem and is not excessively loose or slipping; a control-shaft or valve issue can produce similar symptoms.
• If a burner remains on or behaves unexpectedly, stop using that burner and have the range control system evaluated rather than assuming the knob alone is the cause.

Pro Tip

Part Details

Installation Notes

• Turn all burner controls OFF and allow the control area to cool before handling the knob.
• Pull the old knob straight off the control stem; do not pry against the control panel.
• Align the replacement knob with the stem and press it fully into place.
• After installation, verify that the knob pointer aligns with the panel markings and that the control turns smoothly.

Verified Compatible Models

KFGC500JAV00, KFGC500JIB01, KFGC500JIB05, KFGC500JMH00, KFGC500JPA00, KFGC500JSC00, KFGC500JSS00, KFGC506JBK00, KFGC506JIB00, KFGC506JSC00, KFGC506JSC02, KFGC506JSS05, KFGC558JIB05, KFGC558JIB07, KFGC558JSS00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.