Whirlpool Door boot seal (washer bellow) W11384425, Replaces W10920669

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water leakage at or below the front door
• Visible tear, crack, deformation, or misalignment in the boot seal
• Door may not close or lock properly if the seal is damaged or misaligned

Check Before Replacing

• With the washer empty and powered off, inspect the entire boot for tears, cracks, foreign objects, deformation, or sections pulled out of position.
• Check that the seal is evenly seated around the door opening and that the door contacts the gasket uniformly when closed.
• Clean and dry the accessible gasket folds, then observe the location of any leakage during a supervised cycle; leakage may have other causes and does not by itself confirm boot-seal failure.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before servicing and follow the model-specific service instructions.
• Wear protective work gloves during removal and installation.
• Ensure the replacement boot is fully and evenly seated before reassembling the washer and testing for leaks.
• Verify the appliance model before installation because boot shape and fit can vary by model.

Verified Compatible Models

8TMHW6630HW0, 8TMHW6630HW1, 8TMHW6630HW2, 8TWFW6620HW0, 8TWFW6620HW1, 8TWFW6620HW2, 8TWFW8620HW0, 8TWFW8620HW1, 8TWFW8620HW2, BNF15ASANA0, BNF15ASANA1, MFW7020RF0, MFW7020RU0, MFW7020RW0, MHW8630HC1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.